Brauchst du den ATI Chip oder würde dir auch die Intel Grafik reichen?
Die Anleitung hier hat mich gestern gerettet, die schaltet den ATI Chip einfach komplett ab auf UEFI Ebene und sollte das Problem dauerhaft lösen.
Wenn du das Board tauschen lässt, wird es früher oder später wieder kaputt gehen, weil die Kühlung der GPU mangelhaft ist! Bei mir ist das ausgetauschte Board wieder kaputt gegangen nach ca 1,5 Jahren.
Wenn du ihn nicht brauchst, mach das hier. Wenn du nicht bis in die Dienstprogramme kommst, musst du deine Fesplatte ausbauen und Punkt a) auf einem anderen Mac durchführen, wo du deine Festplatte per USB dranklemmst oder einbaust.
a] Boot holding CMD+R and enter in terminal : csrutil disable; reboot ( it will Disable System Integrity Protection ) Boot holding CMD+S, then in terminal execute commands : 1) fsck -fy (to check a disk) 2) mount -uw / (mount a root filesystem with read/write permissions) 3) sudo mkdir /AMD_Kexts/ (make a directory to store the AMD drivers in case you'll need them in future) 4) sudo mv /System/Library/Extensions/AMD*.* /AMD_Kexts/ (move the AMD drivers) 5) sudo rm -rf /System/Library/Caches/com.apple.kext.caches/ (remove the AMD drivers cache) 6) sudo mkdir /System/Library/Caches/com.apple.kext.caches/ (just in case OS X will be dumb and will not recreate this directory, I am creating it for OS X) 7) sudo touch /System/Library/Extensions/ (to update the timestamps so that new driver caches - without AMD drivers - will be definitely rebuilt) 8) sudo umount / (umount a partition to guarantee that your changes are flushed to it) 9) sudo reboot Give back your HDD to your broken Macbook ( If you put it to another before ) b] I made Arch Linux USB c] I booted holding Option ( ALT ), selected UEFI then pressed "e" key, then added nomodeset to end of line on Arch Linux archiso ...... d] In cmd line i did : cd /sys/firmware/efi/efivars e] I list files in this directory by ls command f] I wrote printf "\x07\x00\x00\x00\x01\x00\x00\x00" > /sys/firmware/efi/efivars/gpu-power-prefs-fa4ce28d-XXXXXXXXXXXXXXX (where XXX represents YOURS values from gpu-active- that you listed in point e of this list) g] I locked the file by chattr +i "/sys/firmware/efi/efivars/gpu-power-prefs-fa4ce28d-XXXXXXXXXXXXXXX h] wrote cd / i] wrote umount /sys/firmware/efi/efivars/ j] wrote reboot
edit: hier wird das ganze in einem video erklärt