Beim Klacken wird der Datenarm der Festplatte geparkt. Kann man aber abstellen. Mit Hdapm: http://mckinlay.net.nz/hdapm/
Dazu gehört noch ein Terminalbefehl, der hier irgendwo zu finden ist. Ein Freund hat es bei einer Platte letztens gemacht und die Geräuschkullisse war anschließend wirklich angenehmer.
PS: Hier gefunden: Terminal-Befehl
https://www.macuser.de/forum/f10/idle-klick-meiner-315459/index31.html#post5968117
Hdapm ist noch weiter interessant, weil man darüber auch die Geschwindigkeit der Festplatte einstellen kann. In jedem Fall sollte man die Readme durchlesen, damit bei der Installation nichts falsch macht.
Dazu gehört noch ein Terminalbefehl, der hier irgendwo zu finden ist. Ein Freund hat es bei einer Platte letztens gemacht und die Geräuschkullisse war anschließend wirklich angenehmer.
PS: Hier gefunden: Terminal-Befehl
https://www.macuser.de/forum/f10/idle-klick-meiner-315459/index31.html#post5968117
Hdapm ist noch weiter interessant, weil man darüber auch die Geschwindigkeit der Festplatte einstellen kann. In jedem Fall sollte man die Readme durchlesen, damit bei der Installation nichts falsch macht.
Installation
Copy hdapm to somewhere on your system - I suggest /usr/local/bin. If you want to have hdapm run automatically at startup, also copy the hdapm.plist to /Library/LaunchDaemons
Note that you may need to edit hdapm.plist with your desired settings. By default it assumes you installed the hdapm binary in /usr/local/bin, and will set the primary drive (disk0) to the maximum performance APM level.
Usage
hdapm device level Example: hdapm disk0 max
hdapm takes two arguments: the device name of the target drive (usually disk0), and the desired APM level. The APM level is a number between 1 and 254, inclusive. The exact meaning of each value depends on your driveʼs firmware, but in general lower numbers mean more power saving and higher numbers mean more performance.
The following APM levels are pre-defined, and can be used in place of a numeric value: • max - maximum performance. Use this setting to eliminate “clicking when idle” noises. • min - maximum power savings. • default - return to default setting.
Uninstalling
To completely remove hdapm from your system, delete the following files:
/Library/LaunchDaemons/hdapm.plist /usr/local/bin/hdapm