Folgen Sie dem Video unten, um zu sehen, wie Sie unsere Website als Icon auf Ihrem Homescreen erstellen.
Anmerkung: This feature may not be available in some browsers.
Ich betreibe einen Ricoh SP 1210N von 2012 über USB mit einem Gutenprint-Treiber. Das funktioniert tadellos unter Sonoma 14.1.2 auf einem M1. Das der HP gelistet ist, sollte das auch funktionieren.
Ich habe keine Synologie und auch keinen Rasperry. Dann hätte ich doch vermutlich keinen vor 20 Jahren entwickelten Drucker noch am Laufen..
Ich habe den Treiber automatisch im AppleDruckerdialog installiert. Ohne irgendwelche Umwege.
Wird dir da nichts angeboten?
Hast du nach Installation des Gutenprint .dmg keinen neuen Drucker hinzugefügt? Da lässt sich dann der Treiber auswählen. (Brother HL-1850 Cups+Gutenprint)Ich hab das Package halt per Doppelklick installiert, ( dmg-geladen) die üblichen Abfragen wohin, und Zustimmung zur Lizenz, quittiert mit "wurde erfolgreich installiert". Wohin der jetzt genau gelandet ist, keine Ahnung, unter Gutenprint bei suche finde ich nichts und in der Syseinstellung Drucker hat sich nichts verändert, das steht der Brother als Standard wie immer schon..und erkannt wird der in jedem Programm.
Siehe:Ich hab das Package halt per Doppelklick installiert, ( dmg-geladen) die üblichen Abfragen wohin, und Zustimmung zur Lizenz, quittiert mit "wurde erfolgreich installiert". Wohin der jetzt genau gelandet ist, keine Ahnung, unter Gutenprint bei suche finde ich nichts und in der Syseinstellung Drucker hat sich nichts verändert, das steht der Brother als Standard wie immer schon..und erkannt wird der in jedem Programm.
Quelle: https://gimp-print.sourceforge.io/p_FAQ_OS_X.php#usbSetupIf your printer is supported by Gutenprint and it is connected directly to your Mac with a USB cable then you should follow these steps to set it up:
- USB connection
- Make sure the USB cable is properly connected to both your printer and your Mac.
- Turn on your printer.
- Restart your Mac (if you know what you're doing and you know that you do not have any print jobs in progress you can do sudo killall -HUP cupsd instead of restarting)
- Leopard (OS X 10.5.x) and Snow Leopard (OS X 10.6.x) users should use the Print & Fax from System Preferences. Click on the + (plus) icon at the lower left. A new window will open. In that window, click the Default Browser icon at the top left. Highlight your printer in the section below. Use the "Print Using" pop-up menu near the bottom of the window to select the correct PPD for your printer and click Add.
Tiger (OS X 10.4.x) users should open the Printer Setup Utility and click on the Add icon at the top of the Printer List window. A new window will open. In that window, click the Default Browser icon at the top left. Highlight your printer in the section below. Use the "Print Using" pop-up menu near the bottom of the window to select the correct PPD for your printer and click Add.
Jaguar (OS X 10.2.x) and Panther (OS X 10.3.x) users should open Print Center (Jaguar) or Printer Setup Utility (Panther), hold down the Option key, and click the Add Printer button in the Print Center toolbar. Within the setup sheet, choose Advanced from the top popup menu; then in the "Device:" popup menu select your printer by name (it should be the last item in the menu list). Finally, select the correct PPD from the model browser and click Add.- Print a test page.
http://localhost:631/printers/
http://localhost:631/admin
@pk2061 Was soll denn der Raspberry dabei, macOS nutzt doch sowieso schon CUPS ???Alternative:
Wenn du einen RaspberryPi rumliegen hast, kannst du auf diesem Cups installieren und den Drucker am Pi betreiben.
(Der Drucker ist dann auch direkt via AirPrint im Netzwerk verfügbar).
Das funktioniert nicht, irgendwie nicht erlaubt. Neustart wie beschrieben hatte ich nat. gemacht..aber:Ansonsten schaue nach, ob du folgende lokale Seiten im Browser aufrufen kannst..
Das hier war der Gamechanger, die Lösung!Hast du nach Installation des Gutenprint .dmg keinen neuen Drucker hinzugefügt? Da lässt sich dann der Treiber auswählen. (Brother HL-1850 Cups+Gutenprint)
@pk2061 Was soll denn der Raspberry dabei, macOS nutzt doch sowieso schon CUPS ???
[...]
dann hast du eben Glück - ich geh auf Nummer sicher und kann nur aus meiner Erfahrung sagen, weder meine 7490 früher noch mein Netzwerk mit jetzt 2x7590 schafft das über Fritz!Box, wenn sonst auch noch ordentlich Verkehr über die Ports saust... Teltonika hat da keine Probleme,...Sorry das ist Blödsinn.
Ich betreibe einen Laserjet 1010 von 2001 oder 2002 am USB-Port einer FRITZ!Box 7170 von 2006.
Funktioniert im Netzwerk ohne Probleme!