mahlzeit allerseits,
hier mal die log's,
vom ersten versuch:
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************
01FC2961
01FC2981
01FC298E
01FC2978
01FC2991
*******************************************************
* Adding 'timebase_frequency: 0x01FC2961' to
* /etc/mol/session.map will prevent this delay
*******************************************************
Locking RAM
Running in PowerPC 7400 mode, 500 MB RAM
Warning: Using hardcoded clock frequency (350 MHz)
Timebase: 33.30 MHz, Bus: 133.21 MHz, Clock: 350 MHz
---> Failed opening '/dev/input/mice': No such file or directory
Could not connect to X server :0.0
Video driver(s):
No video modes at all was found - exiting
cleaning up...
Terminating threads...
und von der kernel panik:
*******************************************************
* Measuring the timebase frequency.
* This will take about 5 seconds
*******************************************************
01FC2967
01FC2970
01FC297A
01FC297E
01FC298B
*******************************************************
* Adding 'timebase_frequency: 0x01FC2967' to
* /etc/mol/session.map will prevent this delay
*******************************************************
Locking RAM
Running in PowerPC 750 mode, 500 MB RAM
Warning: Using hardcoded clock frequency (350 MHz)
Timebase: 33.30 MHz, Bus: 133.21 MHz, Clock: 350 MHz
---> Failed opening '/dev/input/mice': No such file or directory
OHCI USB controller registered
Could not open '/Users/jorgsieber/Library/Mac-on-Mac/VM2/x11.kbd'
Video driver(s): [xvideo]
640* 480, depth 8,32 { 0.0 } Hz
800* 600, depth 8,32 { 0.0 } Hz
1024* 768, depth 8,32 { 0.0 } Hz
1152* 864, depth 8,32 { 0.0 } Hz
1280*1024, depth 8,32 { 0.0 } Hz
1600*1200, depth 8,32 { 0.0 } Hz
Disk /Volumes/MIRRO.. - Partioned - <rw> 647 MB BOOT1
SCSI devices:
<No SCSI Devices>
>> ==================================================
>> MacOS X Boot Loader 0.9.70
>> Candidate boot volume: /mol-blk@0/disk@0:3
>> /mol-blk@0/disk@0:3,\mach_kernel (3859004 bytes)
>> /mol-blk@0/disk@0:3,\System\Library\Extensions.mkext
>> File is too large.
>> Failed to load mkext!
>> Loading from /mol-blk@0/disk@0:3,\System\Library\
>> ==================================================
***** SIGNAL 13 [Broken pipe] in thread main-thread *****
cleaning up...
Terminating threads...
hoffe es hilft
bis denne