Ich habe mir jetzt auch die Apple In-Ear zugelegt und bin eigentlich recht zufrieden. Ich hatte allerdings auch keine große Wahl, da ich noch einen 20 € Gutschein von Gravis
hatte. Den musste ich loswerden und Gravis hatte sonst keine anderen In-Ear Kopfhörer. Ob sie bei mir passten wusste ich vorher natürlich nicht. Der äusserst gesprächige und nicht sehr hilfreiche Gravismensch hat mir nur dazu sagen können, dass sie bei ihm sofort wieder rauskamen, aber natürlich einen unglaublichen Sound hätten, wenn sie einmal drin sind. Ausprobieren durfte ich sie auch nicht. Doch der Sprung ins kalte Wasser hat sich gelohnt.
Die Dinger ordentlich in die Ohren reinzustopfen ist nicht ganz einfach. Wenn man aber ein bisschen fummelt und nicht zimperlich ist beim Stopfen in den Gehörgang, dann sitzen sie bombenfest. Vorher muss man noch mit den Aufsätzen ein bisschen rumprobieren. Ich brauche z.B. links den mittleren und rechts den großen, damit es ordentlich passt. Bis ich das rausgefunden hatte, habe ich mehrere Tage rumexperimentiert.
Ob sie richtig drin sind, testet man am einfachsten indem man gegen den Stöpsel oder das Kabel klopft. Wenn sich das schön dumpf anhört ist man auf dem richtigen Weg.
Bei
Shure gibt es auch eine Anleitung, wie man in-ear Kopfhörer einsetzt.
Die Umgebungsgeräusche sind deutlich gedämpft, ohne dass man von seiner Umwelt komplett abgeschlossen ist, ausser natürlich die Lautstärke ist hoch. In der Frankfurter U-Bahn hatte ich mit den normalen iPod-Hörern keine Chance. Doch mit den In-Ear ist es selbst auf niedriger Lautstärke kein Problem. Überall, wo es laut ist, kann ich jetzt ganz entspannt meinem kleinen weiss-silbrigen Freund lauschen.
Die beiden Stöpsel sind extrem leise geworden . Ich denke das liegt daran das sich der Klangkörper mit Ohrenschmalz zugezoegen hat und verstopft ist . Ich habe aber keine Ahnung wie ich das wieder hinbekommen soll . Hat einer von euch dasselbe Problem ?
http://www.padawan.info/apple/apple_inear_headphones.html schrieb:
But recently the sound on one of the headphones suddenly dropped to a very low level. At first I feared I had damaged the cable, which is the biggest risk on those things. Then I found out — thanks to the mighty internet — that this is the main symptom of an ear wax pollution. Contrary to some other earphones, Apple’s in-ear headphones are sealed and you cannot clean the speakers easily. What I did was to put some ear-cleaning spray solution on a kleenex and gently tap the metallic mesh to dissolve and remove the ear wax. And here I am, problem fixed, my earphones sound like new again. Me happy.
Auch sehr interessant:
http://www.macuser.org.sg/yabbse/index.php?PHPSESSID=7401ab448711eb1a8a404b35b0020908&topic=10401.msg67524#msg67524 schrieb:
You know that cleaning the ear wax too often is VERY dangerous, especially if you are depandant on your ears as a career like Plastic and I. Being an audio engineer for many years, I have had the luxury of meeting many well known international audio engineers from the UK and US and 1 of the most important thing that I learnt from them is that having your ears totally 'wax-free' *is a BIG no-no!!!
Ear wax plays a very important part in helping us hear the complete frequency range better. By removing ear wax, you are removing the natural lubricants that are there to help the tiny hair follicles to be flexible when frequencies pass through our ear. If there is no lubrication in our ears, the follicles become stiff and we lose the frequency in our ears. That's when deafness in certain frequencies start occuring.
So, how do we cleans our ears??? Not with cotton buds for sure!!!! Use some warm peanut oil and tissue or go out to the pharmacy and get the ear cleaning solutions/oil and make a few drops into your ears.