Ich hab den D-Link DWL-122 am Laufen, welcher wunderbar funtioniert und auch den Prism2-Chipsatz hat. Anleitung:
link
Hier ne XF86Config:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "record"
Load "xtrap"
Load "glx"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "macintosh/de_new"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "6 5"
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
UseModes "Modes0"
#HorizSync 30-70
#VertRefresh 50-160
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon 9200 Mobility"
Option "UseFBDev"
Option "AGPMode" "4"
Option "EnablePageFlip" "On"
ChipID 0x514d
Option "CloneMode" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "640x480" "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "640x480" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "640x480" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "640x480" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "640x480" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "640x480" "800x600"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Modes"
Identifier "Modes0"
# mode generated by Xeasyconf
#Modeline "1024x768" 100.000 1024 1040 1048 1064 768 784 792 808 -HSync -VSync
Modeline "1024x768" 75.000 1024 1040 1048 1064 768 784 792 808 -HSync -VSync
EndSection