so hier die isdn!
# Optional package: ISDN
#------------------------------------------------------------------------------
OPT_ISDN='yes' #use ISDN: yes or no
ISDN_TYPE='27' #type, e.g. Teles 16.3 ISA
ISDN_IO='' #io, e.g. 0xd80 for Teles 16.3 ISA
ISDN_IO0='' #io0
ISDN_IO1='' #io1
ISDN_MEM='' #mem
ISDN_IRQ='' #irq, e.g. 12 for Teles 16.3 ISA
ISDN_DEBUG_LEVEL='31' #debug level (hisax driver)
ISDN_VERBOSE_LEVEL='2' #verbose level
#----------------------------------------------------------------------------
# ISDN compression (EXPERIMENTAL):
#----------------------------------------------------------------------------
OPT_ISDN_COMP='no' #use LZS or BSD compression: yes or no
ISDN_LZS_DEBUG='1' #debug level lzscomp (0..3)
ISDN_LZS_COMP='8' #compression level lzscomp (0..9)
ISDN_LZS_TWEAK='7' #tweak lzscompr (at present: 0..7)
#----------------------------------------------------------------------------
# ISDN Circuits:
#----------------------------------------------------------------------------
ISDN_CIRCUITS_N='0' #no. of ISDN circuits, DSL: see pppoe.txt
#----------------------------------------------------------------------------
# Circuit 1: Internet-By-Call-Provider MSN
#----------------------------------------------------------------------------
ISDN_CIRC_1_NAME='Arcor' #circuit MSN
ISDN_CIRC_1_USEPEERDNS='no' #use dns server of your provider: yes or no
ISDN_CIRC_1_TYPE='ppp' #circuit uses sync ppp (ipppd)
ISDN_CIRC_1_BUNDLING='yes' #channel bundling: yes or no
ISDN_CIRC_1_BANDWIDTH=''
ISDN_CIRC_1_LOCAL='' #local ip address of your ISDN card - dummy
ISDN_CIRC_1_REMOTE='' #remote ip address (ISDN) - dummy
ISDN_CIRC_1_NETMASK='255.255.255.0' #netmask (ISDN) - dummy
ISDN_CIRC_1_MTU='1500' #max transmission unit (use 1500 if comp!)
ISDN_CIRC_1_MRU='1524' #maximum receive unit
ISDN_CIRC_1_COMPRESSION='no' #compress headers/frames, see docum.
ISDN_CIRC_1_FRAMECOMP='default' #type of framecompression, see docum.
ISDN_CIRC_1_IPX_NETWORK='' #optional: ipx network
ISDN_CIRC_1_IPX_NODE='' #optional: ipx nodes local:remote
ISDN_CIRC_1_REMOTENAME='' #optional: remote hostname for dialin
ISDN_CIRC_1_USER='******' #User-ID to login into providers gateway
ISDN_CIRC_1_PASS='******' #Password for login
ISDN_CIRC_1_ROUTE='0.0.0.0' #this is the default route
ISDN_CIRC_1_DIALOUT='01920782' #dialout: ISDN number of provider
ISDN_CIRC_1_DIALIN='' #dialin: no dialin
ISDN_CIRC_1_CALLBACK='off' #callback mode: in, out, or off
ISDN_CIRC_1_CBDELAY='3' #callback delay, only used for callbacks
ISDN_CIRC_1_EAZ='230066' #your MSN (without area code)
ISDN_CIRC_1_SLAVE_EAZ='' #optional slave MSN for channel bundling
ISDN_CIRC_1_DEBUG='yes' #enable ipppd debugging, yes or no
ISDN_CIRC_1_AUTH='' #require the peer to authenticate itself
ISDN_CIRC_1_HUP_TIMEOUT='45' #Hangup after 45 seconds idle time
ISDN_CIRC_1_CHARGEINT='1' #Value of charge interval (in seconds)
ISDN_CIRC_1_TIMES='Mo-Su:00-24:0.0148:Y'
# times/charges when LCR
#------------------------------------------------------------------------------
# Circuit 2: bidirectional connection to another router with raw tcpip
# not activated yet, only example for non-default-circuit
#------------------------------------------------------------------------------
ISDN_CIRC_2_NAME='Firma' #circuit name, e.g. Firma
ISDN_CIRC_2_USEPEERDNS='no' #use dns server of your provider: yes or no
ISDN_CIRC_2_TYPE='raw' #circuit uses raw tcp/ip
ISDN_CIRC_2_BUNDLING='no' #channel bundling: yes or no
ISDN_CIRC_2_BANDWIDTH=''
ISDN_CIRC_2_LOCAL='192.168.120.8' #local ip address of this circuit
ISDN_CIRC_2_REMOTE='192.168.120.7' #remote ip address of this circuit
ISDN_CIRC_2_NETMASK='255.255.255.0' #netmask of this circuit
ISDN_CIRC_2_MTU='1500' #max transmission unit (use 1500 if comp!)
ISDN_CIRC_2_MRU='1524' #maximum receive unit
ISDN_CIRC_2_COMPRESSION='no' #compress headers/frames, see docum.
ISDN_CIRC_2_FRAMECOMP='default' #type of framecompression, see docum.
ISDN_CIRC_2_IPX_NETWORK='' #optional: ipx network
ISDN_CIRC_2_IPX_NODE='' #optional: ipx nodes local:remote
ISDN_CIRC_2_REMOTENAME='' #optional: remote hostname for dialin
ISDN_CIRC_2_USER='' #user-id not used if raw connection
ISDN_CIRC_2_PASS='' #password not used if raw connection
ISDN_CIRC_2_ROUTE='192.168.1.0' #remote net to reach over this circuit
ISDN_CIRC_2_DIALOUT='0221xxxxxx' #dialout no. of remote router
ISDN_CIRC_2_DIALIN='221xxxxxx' #dialin no. with area code, but no leading 0
ISDN_CIRC_2_CALLBACK='off' #callback mode: in, out, or off
ISDN_CIRC_2_CBDELAY='3' #callback delay, only used for callbacks
ISDN_CIRC_2_EAZ='81330' #Your MSN (without area code)
ISDN_CIRC_2_SLAVE_EAZ='' #optional slave MSN for channel bundling
ISDN_CIRC_2_DEBUG='no' #ever no if raw-ip connection
ISDN_CIRC_2_AUTH='' #not needed if raw-ip connection
ISDN_CIRC_2_HUP_TIMEOUT='45' #Hangup after XX seconds idle time
ISDN_CIRC_2_CHARGEINT='90' #Value of charge interval (in seconds)
ISDN_CIRC_2_TIMES='Mo-Fr:09-18:0.08:N Mo-Fr:18-09:0.03:N Sa-Su:00-24:0.03:N'
# times/charges when LCR
#------------------------------------------------------------------------------
# telmond configuration:
#------------------------------------------------------------------------------
OPT_TELMOND='yes' #start telmond: yes or no
TELMOND_PORT='5001' #TCP-Port, see also FIREWALL_DENY_PORT_x!
TELMOND_LOG='yes' #log /var/log/telmond.log: yes or no
TELMOND_LOGDIR='/var/log' #log-directory, e.g. /var/log
TELMOND_MSN_N='0' #number of msn->ip mapping entries
TELMOND_MSN_1='123 192.168.6.2' #e.g. map MSN 123 to client 192.168.6.2
TELMOND_CMD_N='0' #no. of commands to be executed if call-in
TELMOND_CMD_1='123 * sleep 5; imonc dial'# e.g. dial out via default circuit