HeckMeck
Aktives Mitglied
Thread Starter
- Dabei seit
- 11.11.2002
- Beiträge
- 2.536
- Reaktionspunkte
- 16
Hallo ihr MacEntwickler,
mangels eines passenden Forums nutze ich mal eures, um meine Frage zum iPhone Configuration Utility zu posten.
Ich habe das Programm unter folgendem Link geladen für Mac OS X geladen und auch schon ein funktionierendes Profil erstellt. Nun möchte ich dieses Profil noch gerne signieren, allerdings weiss ich nicht wie. In dem von Apple verlinkten Enterprise Deployment Guide steht nur folgende Bemerkung:
Nun komme ich leider nicht weiter, weil ich noch irgendetwas signiert habe. Im Netz, auf den Apple Seiten und auch im Apple Developer Center finde ich keine Informationen, wie man die benötigten Zertifikate erhält und einfügt.
Hat das jemand von euch schon mal gemacht und könnte mir hier helfend zur Hand gehen? Ich habe bis jetzt weder ein Zertifikat und noch gar keine Ahnung, was ich machen muss.
Vielen Dank
mangels eines passenden Forums nutze ich mal eures, um meine Frage zum iPhone Configuration Utility zu posten.
Ich habe das Programm unter folgendem Link geladen für Mac OS X geladen und auch schon ein funktionierendes Profil erstellt. Nun möchte ich dieses Profil noch gerne signieren, allerdings weiss ich nicht wie. In dem von Apple verlinkten Enterprise Deployment Guide steht nur folgende Bemerkung:
Creating and Deploying Configuration Profiles
Profiles can be verified by signing them, but signed profiles aren’t required. If you don’t sign a profile, its status is shown as Unsigned when viewed on the device.
If you choose to sign a profile, and the signature can be verified by a certificate on the device, its status is Verified. If the certificate necessary to verify the signature isn’t on the device, or if the chain of trust cannot be linked to a root CA that is on the device, then the profile’s status is Not Verified.
Signed profiles are indicated with a checkmark:
To sign a profile, click Apply Signature in the Signature section of the General pane. In the Configuration Signing window that appears, add the digital certificates necessary to authenticate your signature. (Certificates in raw formats 1 and 12 are supported.) Then select your private key file and click Sign. The certificate you select here isn’t added to the device, and is only used to verify your signature. For information about how to add certificates to the device, see “Credentials Settings” on page 25. Once you sign a profile, you cannot modify it until you remove the signature.
Nun komme ich leider nicht weiter, weil ich noch irgendetwas signiert habe. Im Netz, auf den Apple Seiten und auch im Apple Developer Center finde ich keine Informationen, wie man die benötigten Zertifikate erhält und einfügt.
Hat das jemand von euch schon mal gemacht und könnte mir hier helfend zur Hand gehen? Ich habe bis jetzt weder ein Zertifikat und noch gar keine Ahnung, was ich machen muss.
Vielen Dank