iMac Late 2012 startet langsam - was tun?

[poncherello]

Moin Moin!

Ich habe bei meinem 27 Zoll iMac Late 2012 (3,2 Ghz i5), macOS High Sierra (10.13.1) ein Problem mit dem Starten. Von heute auf morgen, ohne erkenntlichen Grund (neue App etc) startet der iMac auf einmal extrem langsam. Handgestoppte 4:20 Minuten benötigt er, bis er voll hochgefahren ist. Zuvor waren es vielleicht 30 Sekunden.

Seltsam ist, dass der Statusbalken beim Hochfahren erst schnell geht, dann immer langsamer wird. Und wenn der Balken vollständig gefüllt ist, erscheint ein weiteres Bild mit Statusbalken, dass nur noch das Ende des Balkens lädt und dann ist der iMac da.

PRAM Reset habe ich bereits durchgeführt. Die Erste Hilfe im Festplattendienstprogramm auch.

Hat jemand eine Idee, was ich noch versuchen könnte?

Danke und Gruß
ponch

 

[MacMac512]

Bitte einmal EtreCheck downloaden, installieren und das Ergebnis hier in CODE Tags posten.
Siehe dazu das Bild.

Danke.

 

[poncherello]

Erledigt.

EtreCheck version: 3.4.6 (460)
Report generated 2017-12-12 20:08:42
Download EtreCheck from https://etrecheck.com
Runtime: 1:56
Performance: Excellent

Click the [Lookup] links for more information from Apple Support Communities.
Click the [Details] links for more information about that line.
Click the [Clean up] link to delete unused files.

Problem: Computer is too slow

Hardware Information: ⓘ
    iMac (27-inch, Late 2012)
    [Technical Specifications] - [User Guide] - [Warranty & Service]
    iMac - model: iMac13,2
    1 3,2 GHz Intel Core i5 (i5-3470) CPU: 4-core
    8 GB RAM Upgradeable - [Instructions]
        BANK 0/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            4 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            Empty   
        BANK 1/DIMM1
            Empty   
    Handoff/Airdrop2: supported
    Wireless:  en1: 802.11 a/b/g/n
    iCloud Quota: 482 MB available

Video Information: ⓘ
    NVIDIA GeForce GTX 675MX - VRAM: 1 GB
        iMac 2560 x 1440
        SyncMaster 1680 x 1050 @ 60 Hz

Disk Information: ⓘ
    APPLE HDD ST3000DM001 disk1: (3 TB) (Rotational)
    [Show SMART report]
        EFI (disk1s1 - MS-DOS FAT32) <not mounted>  [EFI]: 210 MB
        (disk1s2) <not mounted>  [CoreStorage Container]: 3.00 TB
        (disk1s3) <not mounted>  [Recovery]: 650 MB

    APPLE SSD SM128E disk0: (121,33 GB) (Solid State - TRIM: Yes)
    [Show SMART report]
        EFI (disk0s1 - MS-DOS FAT32) <not mounted>  [EFI]: 210 MB
        (disk0s2) <not mounted>  [CoreStorage Container]: 120.99 GB
        (disk0s3) <not mounted>  [Boot]: 134 MB

USB Information: ⓘ
     USB20Bus
         hub_device
            Apple Inc. FaceTime HD Camera (Built-in)
     USB20Bus
         hub_device
             hub_device
                Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
     USB30Bus
        VIA Labs, Inc.          USB3.0 Hub             
        VIA Labs, Inc.          USB2.0 Hub             
            TS-RDF8  Transcend   

Thunderbolt Information: ⓘ
    Apple Inc. thunderbolt_bus

Virtual disks: ⓘ
    Macintosh HD (disk2 - Journaled HFS+) /  [Startup]: 3.11 TB (1.48 TB free)
        Physical disk: disk0s2 120.99 GB Online
        Physical disk: disk1s2 3.00 TB Online

System Software: ⓘ
    macOS High Sierra  10.13.1 (17B48) - Time since boot: less than an hour

Gatekeeper: ⓘ
    Mac App Store and identified developers

Clean up: ⓘ
    /Library/LaunchAgents/HWPortCfg.plist
        /Library/StartupItems/HWPortDetect/HWPortCfg
        Executable not found!
    One orphan file found. [Clean up]

Kernel Extensions: ⓘ
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (11.1.0 32202 - SDK 10.9) [Lookup]
    [not loaded]    com.parallels.kext.netbridge (11.1.0 32202 - SDK 10.9) [Lookup]
    [not loaded]    com.parallels.kext.usbconnect (11.1.0 32202 - SDK 10.9) [Lookup]
    [not loaded]    com.parallels.kext.vnic (11.1.0 32202 - SDK 10.9) [Lookup]

        /Applications/Toast 10 Titanium/Toast Titanium.app
    [not loaded]    com.roxio.BluRaySupport (1.1.6) [Lookup]
    [not loaded]    com.roxio.TDIXController (1.7) [Lookup]

        /Applications/Viscosity.app
    [not loaded]    com.viscosityvpn.Viscosity.tap (1.2) [Lookup]
    [not loaded]    com.viscosityvpn.Viscosity.tun (1.2) [Lookup]

        /Library/Extensions
    [loaded]    at.obdev.nke.LittleSnitch (4.0.4 - SDK 10.11) [Lookup]

System Launch Agents: ⓘ
    [not loaded]    8 Apple tasks
    [loaded]    179 Apple tasks
    [running]    101 Apple tasks

System Launch Daemons: ⓘ
    [not loaded]    35 Apple tasks
    [loaded]    186 Apple tasks
    [running]    109 Apple tasks

Launch Agents: ⓘ
    [failed]    HWPortCfg.plist (? 799429ac 0 - installed 2014-12-11) [Lookup] - /Library/StartupItems/HWPortDetect/HWPortCfg: Executable not found!
    [running]    at.obdev.LittleSnitchHelper.plist (Objective Development Software GmbH - installed 2017-12-12) [Lookup]
    [running]    at.obdev.LittleSnitchUIAgent.plist (Objective Development Software GmbH - installed 2017-12-12) [Lookup]
    [not loaded]    com.adobe.AAM.Updater-1.0.plist (? ffb65062 17b9373f - installed 2013-03-25) [Lookup]
    [loaded]    com.adobe.CS5ServiceManager.plist (? 40cdc1ff dd391a6f - installed 2013-03-25) [Lookup]
    [loaded]    com.divx.dms.agent.plist (? bf9bdaf7 bc61887a - installed 2016-04-25) [Lookup]
    [loaded]    com.divx.update.agent.plist (DivX, LLC - installed 2016-04-25) [Lookup]
    [loaded]    com.google.keystone.agent.plist (Google, Inc. - installed 2017-09-28) [Lookup]
    [loaded]    com.oracle.java.Java-Updater.plist (? 89619c90 fca95490 - installed 2016-02-08) [Lookup]
    [loaded]    org.macosforge.xquartz.startx.plist (Apple Inc. - XQuartz - installed 2014-08-12) [Lookup]

Launch Daemons: ⓘ
    [running]    at.obdev.littlesnitchd.plist (Objective Development Software GmbH - installed 2017-12-12) [Lookup]
    [loaded]    com.adobe.SwitchBoard.plist (? 856489a3 0 - installed 2013-03-25) [Lookup]
    [loaded]    com.adobe.fpsaud.plist (? 2afb3af7 6cf41d3c - installed 2016-04-16) [Lookup]
    [loaded]    com.apple.aelwriter.plist (Apple, Inc. - installed 2013-03-25)
    [not loaded]    com.apple.installer.cleanupinstaller.plist (? 1963bf56 0 - installed 2017-12-12)
    [loaded]    com.google.keystone.daemon.plist (Google, Inc. - installed 2017-10-13) [Lookup]
    [loaded]    com.macpaw.CleanMyMac3.Agent.plist (MacPaw Inc. - installed 2016-10-15) [Lookup]
    [loaded]    com.oracle.java.Helper-Tool.plist (Shell Script e3fefdd2 - installed 2016-01-30) [Lookup]
    [loaded]    com.sparklabs.ViscosityHelper.plist (SparkLabs Pty Ltd - installed 2015-12-01) [Lookup]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist (Apple Inc. - XQuartz - installed 2014-08-12) [Lookup]

User Launch Agents: ⓘ
    [loaded]    com.adobe.AAM.Updater-1.0.plist (? 6a3cceca 17b9373f - installed 2013-03-25) [Lookup]
    [running]    com.amazon.cloud-player.plist (? 9d19e67a 28eba5db - installed 2014-01-16) [Lookup]
    [loaded]    com.dropbox.DropboxMacUpdate.agent.plist (Dropbox, Inc. - installed 2017-08-11) [Lookup]
    [loaded]    com.facebook.videochat.[redacted].plist (Apple, Inc. - installed 2017-12-12)
    [loaded]    com.macpaw.CleanMyMac3.Scheduler.plist (MacPaw Inc. - installed 2016-10-15) [Lookup]

Internet Plug-ins: ⓘ
    Flip4Mac WMV Plugin: 3.2.0.16   (installed 2013-12-19) [Lookup]
    FlashPlayer-10.6: 21.0.0.226 (installed 2016-04-23) [Lookup]
    OVSHelper: 1.1 (installed 2016-04-25) [Lookup]
    DivX Web Player: 3.5.5.3 (installed 2016-03-29) [Lookup]
    QuickTime Plugin: 7.7.3 (installed 2017-10-25)
    Flash Player: 21.0.0.226 (installed 2016-04-23) Outdated! Update
    Silverlight: 5.1.50901.0 (installed 2017-02-04) [Lookup]
    JavaAppletPlugin: Java 8 Update 73 build 02 (installed 2016-02-08) Check version

Safari Extensions: ⓘ
    [enabled]    Open in Internet Explorer - Parallels - http://www.parallels.com (installed 2016-02-27)

3rd Party Preference Panes: ⓘ
    Flash Player (installed 2016-04-16) [Lookup]
    Flip4Mac WMV (installed 2013-12-19) [Lookup]
    Java (installed 2016-02-08) [Lookup]
    MacFUSE (installed 2013-04-03) [Lookup]
    Paragon NTFS for Mac ® OS X (installed 2013-04-03) [Lookup]

Time Machine: ⓘ
    Mobile backups: OFF
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 3.11 TB Disk used: 1.63 TB
    Destinations:
        TM [Local]
        Total size: 3.00 TB
        Total number of backups: 18
        Oldest backup: 23.03.16, 16:36
        Last backup: 11.12.17, 21:41
        Size of backup disk: Too small
            Backup size 3.00 TB < (Disk used 1.63 TB X 3)

Top Processes by CPU: ⓘ
        61%       photoanalysisd
        40%       photolibraryd
        13%       mdworker
        11%       mds
         9%       mdworker

Top Processes by Memory: ⓘ
    814 MB        kernel_task
    218 MB        mds_stores
    177 MB        com.apple.WebKit.WebContent
    133 MB        WindowServer
    121 MB        photoanalysisd

Top Processes by Network Use: ⓘ
    Input         Output        Process name
    320 KB        173 KB        mDNSResponder
    158 KB        71 KB         com.apple.WebKit.Networking
    180 KB        9 KB          com.apple.geod
    26 KB         14 KB         IMRemoteURLConnectionAgent
    12 KB         12 KB         apsd

Top Processes by Energy Use: ⓘ
     65.52    photoanalysisd
     38.62    mds
     29.44    mds_stores
     17.94    photolibraryd
     17.06    com.apple.WebKit.WebContent

Virtual Memory Information: ⓘ
    4.47 GB       Available RAM
    2.06 GB       Free RAM
    3.53 GB       Used RAM
    2.41 GB       Cached files
    0 B           Swap Used

Software installs (last 30 days): ⓘ
    Outbank: 1.12.2 (installed 2017-11-17)
    Outbank: 1.12.3 (installed 2017-12-02)
    Outbank: 1.12.4 (installed 2017-12-09)
    Fotor Photo Editor: 3.5.0 (installed 2017-12-09)

    Install information may not be complete.

Diagnostics Events (last 3 days for minor events): ⓘ
    2017-12-12 20:02:02    Last shutdown cause: 3 - Hard shutdown
    2017-12-12 19:47:10    GarageBand.app Crash [Open]
        Cause:        dyld: launch, loading dependent libraries
        DYLD_FRAMEWORK_PATH=/System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Frameworks

 

[MacMac512]

Danke! Sogar in Code-Tags.
Super!

Nicht so super…

[loaded] com.macpaw.CleanMyMac3.Agent.plist (MacPaw Inc. - installed 2016-10-15) [Lookup]

[loaded] com.macpaw.CleanMyMac3.Scheduler.plist (MacPaw Inc. - installed 2016-10-15) [Lookup]

Hatte ich auch befürchtet.
Also das hier erstmal runterwerfen, das braucht niemand und macht deinen Rechner nur langsam.

Clean up: ⓘ /Library/LaunchAgents/HWPortCfg.plist /Library/StartupItems/HWPortDetect/HWPortCfg Executable not found! One orphan file found. [Clean up]

Hier auch mal auf Clean up klicken.

 

[Impcaligula]

Bisher waren es 1-2 pro Woche die Probleme die mit CleanMyMac, MacKeeper und Co hier mit Problemen aufgeschlagen sind - heute sind es 3 am gleichen Tag
Wieso installiert man sich so Zeugs überhaupt?

 

[dg2rbf]

Das frage ich mich auch, manchmal kannst du nur den Kopf schütteln.

Franz

 

[MacMac512]

Vielleicht haben wir ja jetzt dann die nächsten 3 Wochen Ruhe?

 

[poncherello]

Das Schlimme: Mir ist nicht bewusst, dass ich dieses Programm installiert und benutzt habe. Es muss wohl so sein, sonst wäre es nicht drauf. Eigentlich hatte ich davon immer Abstand genommen.

Danke für die fixe Hilfe.

Das Problem: Clean My Mac ist offensichtlich gar nicht mehr installiert. Zumindest kann ich es unter Apps nirgendwo finden. Die Spotlight Suche spuckt auch nichts aus.

 

[MacMac512]

Nimm beispielsweise EasyFind und suche da nach Clean My Mac.
Das findet normalerweise alles.

Damit dann auch alles löschen, was noch zu finden ist.

Wichtig, als Suchbereich am besten die komplette Festplatte auswählen.

 

[poncherello]

Erledigt und nochmal Danke! Top!

 

[oneOeight]

schau dir doch mal die SMART werte der HDD an, vielleicht gibt die so langsam den geist auf.

und drigender:
deinstallier flash, deine version ist uralt!

 

[poncherello]

Hat sich erübrigt: Per Suche im Finder konnte ich die Dateien löschen.

OK, wird erledigt. Wie komme ich an die SMART Werte?

Zwei Clean My Mac Dateien lassen sich übrigens nicht löschen (siehe Screenshot).

 

[MacMac512]

Markieren, im Finder anzeigen, löschen. Ggf. Password eingeben.

SMART: Beispielsweise so:https://www.xgadget.de/app-software/smart-werte-unter-mac-osx-auslesen-kostenlos/

 

[poncherello]

Das kommt mit K Smart raus

/private/var/folders/t6/bd4pssn10y911ty3cbgzx8hc0000gn/T/AppTranslocation/EE011A7C-8442-4A10-88A5-5A10A68F27A9/d/k-smart.app/Contents/Resources/update-smart-drivedb: download from trunk failed (HTTP error)
Examining /dev/disk0

smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin10.8.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Apple SD/SM/TS...E/F SSDs
Device Model:     APPLE SSD SM128E
Firmware Version: CXM09A1Q
User Capacity:    121,332,826,112 bytes [121 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Dec 12 20:44:21 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  480) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (   8) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1904
 12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       2166
169 Unknown_Attribute       0x0013   253   253   010    Pre-fail  Always       -       464070380672
173 Wear_Leveling_Count     0x0032   193   193   100    Old_age   Always       -       17193893982
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       526
194 Temperature_Celsius     0x0022   066   034   000    Old_age   Always       -       34 (Min/Max 16/66)
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.




Examining /dev/disk1

smartctl 6.4 2015-06-04 r4109 [x86_64-apple-darwin10.8.0] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     APPLE HDD ST3000DM001
Firmware Version: AQ03
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Dec 12 20:44:21 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (   80) seconds.
Offline data collection
capabilities:              (0x73) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    No Offline surface scan supported.
                    Self-test supported.
                    Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   1) minutes.
Extended self-test routine
recommended polling time:      ( 322) minutes.
Conveyance self-test routine
recommended polling time:      (   2) minutes.
SCT capabilities:            (0x10bd)    SCT Status supported.
                    SCT Error Recovery Control supported.
                    SCT Feature Control supported.
                    SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       159926616
  3 Spin_Up_Time            0x0003   095   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       954
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   069   060   030    Pre-fail  Always       -       9236058
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       550
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       923
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       0 0 1
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   064   053   045    Old_age   Always       -       36 (Min/Max 34/37)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       52
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       960
194 Temperature_Celsius     0x0022   036   047   000    Old_age   Always       -       36 (0 15 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       588h+21m+16.155s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       6299515170
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1095065036895

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 

[poncherello]

schau dir doch mal die SMART werte der HDD an, vielleicht gibt die so langsam den geist auf.

und drigender:
deinstallier flash, deine version ist uralt!

Flash ist deinstalliert

 

[MacMac512]

Viele old-age und pre-fail.
Also die Festplatte könnte demnächst sterben...
Da solltest du ebenfalls handeln und immer mit Backups vorbereitet sein - sollte man eh immer.

 

[poncherello]

Backups mache ich regelmäßig.

Ich habe zwischenzeitlich mal neu gestartet. Das Booten dauert immer noch mehr als vier Minuten. Die System-Bremse scheint also leider noch nicht dabei gewesen zu sein.

 

[poncherello]

Welche Festplatte ist denn genau betroffen? Ich habe das Modell mit 3TB-Fuison-Drive. Dabei sind doch eine HDD und eine SSD verbaut, wenn ich mich nicht täusche.

 

[poncherello]

Ich habe es noch mehrmals probiert, aber das Hochfahren dauert immer noch extrem lange. Hat noch jemand eine Idee, was ich probieren kann oder ist am Ende doch die schon leicht lädierte Festplatte schuld?

 

[TMacMini]

Wenn Du selber schon die Festplatte als "leicht lädiert" bezeichnest, was hindert Dich, diese gegen eine SSD auszutauschen ?

Wahrscheinlich wirst Du danach Dein MB nicht wieder erkennen