trashart23
Neues Mitglied
Thread Starter
- Dabei seit
- 22.11.2007
- Beiträge
- 6
- Reaktionspunkte
- 0
So mache noch mal ein neues Thema auf, habe anscheinend die falsche Überschrift gewählt.
Jedes mal nach nem langen Ruhezustand bekoome ich ne Kernel Panic oder irgendwelche Programme beenden sich und lassen sich nicht wieder starten.
Hier der aktuelle Log von heute Morgen.
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000002C4438 PC=0x00000000000A4DEC
Latest crash info for cpu 0:
Exception state (sv=0x42B8F000)
PC=0x000A4DEC; MSR=0x00001030; DAR=0x002C4438; DSISR=0x0A000000; LR=0x0002D2B8; R1=0x2C583710; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000FD254 0x000A4698 0x00076028 0x00075B10 0x00076568 0x0028B440
0x000E6164 0x000E6480 0x000E88F8 0x000E847C 0x000E8390 0x000F1234 0x002ABDB8 0x000ABD30
0x00000000
Proceeding back via exception chain:
Exception state (sv=0x42B8F000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42477000)
PC=0x9002882C; MSR=0x0000D030; DAR=0xE1220000; DSISR=0x42000000; LR=0x90824C74; R1=0xBFFFEA70; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x42B8F000)
PC=0x000A4DEC; MSR=0x00001030; DAR=0x002C4438; DSISR=0x0A000000; LR=0x0002D2B8; R1=0x2C583710; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000FD254 0x000A4698 0x00076028 0x00075B10 0x00076568 0x0028B440
0x000E6164 0x000E6480 0x000E88F8 0x000E847C 0x000E8390 0x000F1234 0x002ABDB8 0x000ABD30
0x00000000
Exception state (sv=0x42477000)
PC=0x9002882C; MSR=0x0000D030; DAR=0xE1220000; DSISR=0x42000000; LR=0x90824C74; R1=0xBFFFEA70; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (2.1), 867 MHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 128 MB
Memory Module: DIMM0/J21, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM1/J22, 512 MB, DDR SDRAM, PC2100U-25330
Memory Module: DIMM2/J23, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM3/J20, 512 MB, DDR SDRAM, PC2100U-25330
Modem: Dash2, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet (integriert), Ethernet, en0
PCI Card: usb, usb, SLOT-4
PCI Card: pci1033,e0, SLOT-4
PCI Card: firewire, ieee1394, SLOT-5
Parallel ATA Device: WDC WD800BB-00CAA1, 74.53 GB
Parallel ATA Device: Maxtor 6Y120L0, 114.5 GB
Parallel ATA Device: TSSTcorpCD/DVDW SH-S182D
Parallel ATA Device: IBM-IC35L060AVVA07-0, 57.27 GB
Parallel ATA Device: SAMSUNG SP1614N, 149.05 GB
USB Device: Bluetooth USB Host Controller, Up to 12 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
Hardwaretest meldete keine Fehler.
Kann mir bitte jemand helfen.
Jedes mal nach nem langen Ruhezustand bekoome ich ne Kernel Panic oder irgendwelche Programme beenden sich und lassen sich nicht wieder starten.
Hier der aktuelle Log von heute Morgen.
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x00000000002C4438 PC=0x00000000000A4DEC
Latest crash info for cpu 0:
Exception state (sv=0x42B8F000)
PC=0x000A4DEC; MSR=0x00001030; DAR=0x002C4438; DSISR=0x0A000000; LR=0x0002D2B8; R1=0x2C583710; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000FD254 0x000A4698 0x00076028 0x00075B10 0x00076568 0x0028B440
0x000E6164 0x000E6480 0x000E88F8 0x000E847C 0x000E8390 0x000F1234 0x002ABDB8 0x000ABD30
0x00000000
Proceeding back via exception chain:
Exception state (sv=0x42B8F000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x42477000)
PC=0x9002882C; MSR=0x0000D030; DAR=0xE1220000; DSISR=0x42000000; LR=0x90824C74; R1=0xBFFFEA70; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x000954F8 0x00095A10 0x00026898 0x000A8204 0x000ABB80
Proceeding back via exception chain:
Exception state (sv=0x42B8F000)
PC=0x000A4DEC; MSR=0x00001030; DAR=0x002C4438; DSISR=0x0A000000; LR=0x0002D2B8; R1=0x2C583710; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x000FD254 0x000A4698 0x00076028 0x00075B10 0x00076568 0x0028B440
0x000E6164 0x000E6480 0x000E88F8 0x000E847C 0x000E8390 0x000F1234 0x002ABDB8 0x000ABD30
0x00000000
Exception state (sv=0x42477000)
PC=0x9002882C; MSR=0x0000D030; DAR=0xE1220000; DSISR=0x42000000; LR=0x90824C74; R1=0xBFFFEA70; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC
Model: PowerMac3,6, BootROM 4.4.8f2, 2 processors, PowerPC G4 (2.1), 867 MHz, 2 GB
Graphics: ATI Radeon 9000 Pro, ATY,RV250, AGP, 128 MB
Memory Module: DIMM0/J21, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM1/J22, 512 MB, DDR SDRAM, PC2100U-25330
Memory Module: DIMM2/J23, 512 MB, DDR SDRAM, PC2600U-25330
Memory Module: DIMM3/J20, 512 MB, DDR SDRAM, PC2100U-25330
Modem: Dash2, Euro, V.92, 1.0F, APPLE VERSION 2.6.6
Bluetooth: Version 1.9.5f4, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet (integriert), Ethernet, en0
PCI Card: usb, usb, SLOT-4
PCI Card: pci1033,e0, SLOT-4
PCI Card: firewire, ieee1394, SLOT-5
Parallel ATA Device: WDC WD800BB-00CAA1, 74.53 GB
Parallel ATA Device: Maxtor 6Y120L0, 114.5 GB
Parallel ATA Device: TSSTcorpCD/DVDW SH-S182D
Parallel ATA Device: IBM-IC35L060AVVA07-0, 57.27 GB
Parallel ATA Device: SAMSUNG SP1614N, 149.05 GB
USB Device: Bluetooth USB Host Controller, Up to 12 Mb/sec, 500 mA
USB Device: Hub, Up to 12 Mb/sec, 500 mA
USB Device: Studio Display, Up to 1.5 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
Hardwaretest meldete keine Fehler.
Kann mir bitte jemand helfen.