Thorne^
Aktives Mitglied
Thread Starter
- Dabei seit
- 31.05.2004
- Beiträge
- 2.629
- Reaktionspunkte
- 50
Hallo
Traceroute will nicht richtig funktionieren, bin über die AVM Fritzbox DSL im Router Modus Online. Die nachfolgenden Ergebnisse sind von meinem Powermac G5 mit Mac OS X 10.3.8 (inkl allen Updates).
Braucht man Superuser Rechte, reicht Admin nicht, oder liegt es an Settings?
Die Mac OS X interne Firewall habe ich nicht konfiguriert bisher, da die Fritzbox eine Firewall hat. Am PC mit Windows XP geht es, bei gleicher Router Konfig und Portfreigaben.
Bitte auch mal meine Lüfter Frage anschaun
https://www.macuser.de/forum/showthread.php?t=82346
Beispiel:
traceroute to www.heise.de (193.99.144.85), 30 hops max, 40 byte packets
1 fritz.box (192.168.178.1) 1.369 ms 0.416 ms 0.292 ms
2 dsl-213-023-040-001.arcor-ip.net (213.23.40.1) 9.043 ms 10.4 ms 10.641 ms
3 han-145-254-11-201.arcor-ip.net (145.254.11.201) 8.236 ms 9.071 ms 9.008 ms
4 ffm-145-254-16-254.arcor-ip.net (145.254.16.254) 14.732 ms 12.089 ms 16.532 ms
5 de-cix.ffm.plusline.net (80.81.192.132) 165.938 ms 30.065 ms 238.323 ms
6 heise2.f.de.plusline.net (213.83.57.57) 15.557 ms 13.858 ms 14 ms
7 heise2.f.de.plusline.net (213.83.57.57) 16.227 ms 13.938 ms 13.857 ms
8 * * *
9 * * *
10 * * *
Ping geht gut:
------------------
PING www.heise.de (193.99.144.85): 56 data bytes
64 bytes from 193.99.144.85: icmp_seq=0 ttl=247 time=20.306 ms
64 bytes from 193.99.144.85: icmp_seq=1 ttl=247 time=14.693 ms
64 bytes from 193.99.144.85: icmp_seq=2 ttl=247 time=14.494 ms
64 bytes from 193.99.144.85: icmp_seq=3 ttl=247 time=15.03 ms
64 bytes from 193.99.144.85: icmp_seq=4 ttl=247 time=13.806 ms
noname:~ thorne$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20d:93ff:fe48:71c4 prefixlen 64 scopeid 0x4
inet 192.168.178.20 netmask 0xffffff00 broadcast 192.168.178.255
ether 00:0d:93:48:71:c4
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:0d:93:ff:fe:48:71:c4
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
Traceroute will nicht richtig funktionieren, bin über die AVM Fritzbox DSL im Router Modus Online. Die nachfolgenden Ergebnisse sind von meinem Powermac G5 mit Mac OS X 10.3.8 (inkl allen Updates).
Braucht man Superuser Rechte, reicht Admin nicht, oder liegt es an Settings?
Die Mac OS X interne Firewall habe ich nicht konfiguriert bisher, da die Fritzbox eine Firewall hat. Am PC mit Windows XP geht es, bei gleicher Router Konfig und Portfreigaben.
Bitte auch mal meine Lüfter Frage anschaun
https://www.macuser.de/forum/showthread.php?t=82346
Beispiel:
traceroute to www.heise.de (193.99.144.85), 30 hops max, 40 byte packets
1 fritz.box (192.168.178.1) 1.369 ms 0.416 ms 0.292 ms
2 dsl-213-023-040-001.arcor-ip.net (213.23.40.1) 9.043 ms 10.4 ms 10.641 ms
3 han-145-254-11-201.arcor-ip.net (145.254.11.201) 8.236 ms 9.071 ms 9.008 ms
4 ffm-145-254-16-254.arcor-ip.net (145.254.16.254) 14.732 ms 12.089 ms 16.532 ms
5 de-cix.ffm.plusline.net (80.81.192.132) 165.938 ms 30.065 ms 238.323 ms
6 heise2.f.de.plusline.net (213.83.57.57) 15.557 ms 13.858 ms 14 ms
7 heise2.f.de.plusline.net (213.83.57.57) 16.227 ms 13.938 ms 13.857 ms
8 * * *
9 * * *
10 * * *
Ping geht gut:
------------------
PING www.heise.de (193.99.144.85): 56 data bytes
64 bytes from 193.99.144.85: icmp_seq=0 ttl=247 time=20.306 ms
64 bytes from 193.99.144.85: icmp_seq=1 ttl=247 time=14.693 ms
64 bytes from 193.99.144.85: icmp_seq=2 ttl=247 time=14.494 ms
64 bytes from 193.99.144.85: icmp_seq=3 ttl=247 time=15.03 ms
64 bytes from 193.99.144.85: icmp_seq=4 ttl=247 time=13.806 ms
noname:~ thorne$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20d:93ff:fe48:71c4 prefixlen 64 scopeid 0x4
inet 192.168.178.20 netmask 0xffffff00 broadcast 192.168.178.255
ether 00:0d:93:48:71:c4
media: autoselect (100baseTX <full-duplex>) status: active
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex> 1000baseTX <full-duplex,hw-loopback> 1000baseTX <full-duplex,flow-control> 1000baseTX <full-duplex,flow-control,hw-loopback>
fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:0d:93:ff:fe:48:71:c4
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
Zuletzt bearbeitet: