Bootcamp Patition lässt sich nicht in OSX Aktivieren nach Patitions vergrößerung.

boot.ini wird ja mit windows 7 auch nicht mehr genutzt.
da muss schon bcdedit ran...

mit gdisk kannst die reihenfolge ändern.
 
Folgendes passiert:

Command (? for help): s
You may need to edit /etc/fstab and/or your boot loader configuration!

Habe ich was falsch gemacht?^^
 
nö, ist wohl nicht implementiert oder so...
alternativ kannst auch einen neuen hybrid MBR machen und die reihenfolge da ändern.
da musst ja die nummern dann eingeben.
 
Okay was muss ich dabei beachten bzw hat jemand ein kurzes beispiel für meinen Fall? Danke..

Bin ich bis hierhin richtig? Oder was hätte ich angeben müssen? Habe ja noch kein write gemacht ich warte mal die Antwort hier ab ;)

Recovery/transformation command (? for help): h

WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.

Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 1 2 4 3
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y

Creating entry for GPT partition #1 (MBR partition #2)
Enter an MBR hex code (default EF):
Set the bootable flag? (Y/N):
 
ich frage mich gerade was das bringen soll, dein fdisk hatte windows auch als 4. partition im MBR.
was ist denn wenn du mal mit fdisk die 4. partition so in den MBR packst wie in post #7?
was genau hattest du denn zwischen #7 und #23 gemacht?
 
Ich habe glaube ich mal in f disk update gemacht..sonst nichts soweit ich weiß.
Und wie genau ändern ich diese mit fdisk?

Bei mir sieht es in Fdisk so aus derzeit:

fdisk: 1> p
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 1558323560] HFS+
3: AB 1023 254 63 - 1023 254 63 [1558733200 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1734776832 - 218746880] HPFS/QNX/AUX

Danke =)
 
sudo fdisk -e /dev/disk0
dann halt
edit 4
musst ja nur den start der partition ändern, ggf auch den typ.
hast in post #7 ja die alten daten.
 
Jetzt sagt er beim Windows boot Missing operation system... nachdem ich die platte angepasst hatte wie in beitrag #7das wird ja immer besser..

Fdisk sagt:

fdisk: 1> p
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 1558323560] HFS+
3: AB 1023 254 63 - 1023 254 63 [1558733200 - 1269536] Darwin Boot
*4: 0C 1023 254 63 - 1023 254 63 [1560002736 - 393522432] Win95 FAT32L
fdisk: 1>
 
Auch schon probiert er findet kein Windows =(
Noch ne idee was ich machen kann?
 
mal ne linux live cd probieren, ob du dann auf die partition zugreifen kannst?
alternativ könntest du ja jetzt mal den MBR in den GUID schrieben und gucken, ob dann die partition wieder unter OS X funktioniert...
eventuell musst du wohl noch den typ von FAT32 auf NTFS ändern.
 
Ich brenne mir ebend mal gparted live und schau mal..

Wie kann ich den MBR nochmal in den GUID schreiben?

Vielen dank übrigens für eure Hilfe.

MfG
 
gdisk, erst r und dann f ...
speicher vielleicht mal GPT mit b im ersten menü in ein file, falls was schief geht.
 
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.

So jetzt heißt es daumen drücken xD
 
Okay jetzt verstehe ich die Welt nicht mehr..

fdisk: 1> p
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 0 0 2 - 1023 255 63 [ 1 - 1953525167] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
fdisk: 1>

sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.7

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present

Found valid GPT with protective MBR; using GPT.


Command (? for help): p
Disk /dev/disk0: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 72B89363-BA14-4F00-9F2C-76DA45351D03
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 8-sector boundaries
Total free space is 190383509 sectors (90.8 GiB)

Number Start (sector) End (sector) Size Code Name
2 409640 1543534815 735.8 GiB AF00 Apple HFS/HFS+
3 1543534816 1544804351 619.9 MiB AB00 Apple boot
4 1734776832 1953523711 104.3 GiB 0700 Microsoft basic data


System Info sagt:

Volumes:

Macintosh HD:
Kapazität: 790,08 GB (790.080.090.112 Byte)
Verfügbar: 2,19 GB (2.194.481.152 Byte)
Beschreibbar: Ja
Dateisystem: Journaled HFS+
BSD-Name: disk0s2
Mount-Point: /
Inhalt: Apple_HFS
UUID des Volumes: D34DB8B0-68D7-3748-8AC0-FB4F29510770

Recovery HD:
Kapazität: 650 MB (650.002.432 Byte)
BSD-Name: disk0s3
Inhalt: Apple_Boot
UUID des Volumes: 9986D975-8951-333A-8651-3F8FAA838036


BOOTCAMP:
Kapazität: 112 GB (111.998.402.560 Byte)
Dateisystem: NTFS
BSD-Name: disk0s4
Inhalt: Microsoft Basic Data
UUID des Volumes: D5D2418A-C646-47CA-B4B0-52D93D60AAA8
 
irgendwie scheinst du auf "create a new protective MBR" gekommen zu sein.

du hast noch die fdisk daten in #7, damit kannst den MBR wieder herstellen.
 
Disk: /dev/disk0 geometry: 121601/255/63 [1953525168 sectors]
Offset: 0 Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
1: EE 0 0 2 - 1023 255 63 [ 1 - 1953525167] <Unknown ID>
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused


fdisk: 1> edit 4
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
------------------------------------------------------------------------
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Partition id ('0' to disable) [0 - FF]: [0] (? for help) 0C
Do you wish to edit in CHS mode? [n]
Partition offset [0 - 1953525168]: [0]

Ist das Partition offset so normal kann ich ohne bedenken weitermachen?
 
Alles klar ich habe aufgegeben.. ich möchte mein Windows neu aufsetzen..so nun sagt Bootcamp aber:

Das Startvolume kann weder partitioniert noch in einer Einzelpartition wiederhergestellt werden.
Für die Installation von Windows muss das Startvolume entweder ein als Mac OS-Extended (Journaled) formatiertes Einzelvolume oder bereits durch den Boot Camp-Assistenten partitioniert sein.

gdisk sagt..

EFI ist also weg?!

sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.7

Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): p
Disk /dev/disk0: 1953525168 sectors, 931.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 72B89363-BA14-4F00-9F2C-76DA45351D03
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1953525134
Partitions will be aligned on 8-sector boundaries
Total free space is 409613 sectors (200.0 MiB)

Number Start (sector) End (sector) Size Code Name
1 409640 1952255591 930.7 GiB AF00 Apple HFS/HFS+
2 1952255592 1953525127 619.9 MiB AB00 Apple boot

Was kann ich jetzt tun damit ich Windows installieren kann ohne das ich OSX neu aufsetzen muss bzw die ganze platte Formatieren muss?
 
OS X lauft aber noch ... oder?
geh in das FDP ... lösche die "BootCamp Windowspartition" ziehe die OS X Partition bis unten auf .... ===max. Größe ...

übernehmen ....

oder ...


im BottCamp-Assistenten ...

der wird dir nur anbieten die BC - Windows zu löschen ... tue es ...
 
... hast du noch eine lauffähige Recovery ... oder ein OS X bootmedium ...
hiervon booten und OS X einfach drüber installieren ... deine Daten sind hiervon unberührt ... lediglich das OS X schreibt sich neu .... allerdings sind die Progs / deren Einstellungen dann wech .....
 
Zurück
Oben Unten