Welche Hardware steckt im MacBook Pro?

asg

asg

Aktives Mitglied
Thread Starter
Dabei seit
21.10.2003
Beiträge
1.228
Reaktionspunkte
110
Hallo,

wo komm ich denn an die genauen Daten der HW im MBP 15"?
Bei Apple selbst finde ich nichts.
Der Profiler ist für die Tonne, dmesg rückt auch nichts brauchbares raus. Jemand eine Idee?
 
Boote halt zB FreeSBIE und schau nach? ;-)
 
Solltest du Bootcamp und Windows installiert haben:
Dort lässt sich anhand der Treiber sehr genau nachvollziehen was in
deinem MBP verbaut wurde.

Ich habe dadurch zB bei meinem iMac die neuesten Win Treibern für Grafik, Chipsatz, etc installieren können.
Dieses war ohne Probleme möglich, da es ja (schnöde) Standardkomponenten sind.
 
@paefchen
Ja, genau, spuckt auch nix brauchbares aus, solltest _DU_ doch wissen ;-)
 
# dmesg -a:
Code: 
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #4: Fri Jan 12 09:30:21 UTC 2007
    root@kaiser.sig11.org:/usr/obj.gmv-i386/usr/src/sys/FREESBIE
ACPI APIC Table: <APPLE  Apple00>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz (2327.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2131652608 (2032 MB)
avail memory = 2080968704 (1984 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd0 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <dasp> at device 7.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci0: <UHCI (generic) USB controller> port 0x4080-0x409f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x4060-0x407f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x4040-0x405f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x4020-0x403f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x98405400-0x984057ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: PRETEC Technology USB Mass Storage Device, rev 2.00/1.00, addr 2
ugen0: Micron Built-in iSight, rev 2.00/1.84, addr 3
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci12: <ACPI PCI bus> on pcib5
fwohci0: <Texas Instruments TSB82AA2> mem 0x94004000-0x940047ff,0x94000000-0x94003fff at device 3.0 on pci12
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:19:e3:ff:fe:1b:c8:2e
fwohci0: invalid speed 7 (fixed to 3).
fwohci0: Phy 1394a available S800, 3 ports.
fwohci0: Link S800, max_rec 4096 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:19:e3:1b:c8:2e
fwe0: Ethernet address: 02:19:e3:1b:c8:2e
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7M SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0x98405000-0x984053ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
battery0: <ACPI Control Method Battery> on acpi0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.13, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.13, addr 2, iclass 3/1
ums0: 3 buttons.
uhid0: Apple Computer Apple Internal Keyboard / Trackpad, rev 2.00/0.13, addr 2, iclass 3/1
ums1: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums1: 8 buttons and Z dir.
uhid1: Apple Computer, Inc. IR Receiver, rev 2.00/1.10, addr 2, iclass 3/0
ukbd1: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
kbd2 at ukbd1
ums2: vendor 0x05ac product 0x1000, rev 2.00/19.65, addr 2, iclass 3/1
ums2: 5 buttons.
Timecounter "TSC" frequency 2327516408 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging unlimited
acd0: DVDR <MATSHITADVD-R UJ-857D/KCV9> at ata0-master UDMA66
ad5: 152627MB <Hitachi HTS541616J9SA00 SB4AC7CP> at ata2-slave SATA150
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
GEOM_LABEL: Label for provider acd0 is iso9660/FreeSBIE.
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 
GEOM_LABEL: Label for provider ad5p1 is msdosfs/EFI.
cd0 at ata0 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-R   UJ-857D KCV9> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: cd present [341933 x 2048 byte records]
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <-Pretec 01GB 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 983MB (2015231 512 byte sectors: 64H 32S/T 983C)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 5 37 ac 0 0 1 0 
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): ILLEGAL REQUEST csi:0,1d,0,0 asc:64,0
(cd0:ata0:0:0:0): Illegal mode for this track
(cd0:ata0:0:0:0): Unretryable error
(cd0:ata0:0:0:0): cddone: got error 0x6 back
GEOM_LABEL: Label for provider da0s1 is msdosfs/AS.
Trying to mount root from cd9660:/dev/iso9660/FreeSBIE
md0.uzip: 31630 x 65536 blocks
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 0x2000-0x20ff mem 0x98200000-0x98203fff irq 16 at device 0.0 on pci2
myk0: Ethernet address: 00:17:f2:ca:79:6c
myk0: link up
 
# pciconf -vl:
Code: 
hostb0@pci0:0:0:	class=0x060000 card=0x72708086 chip=0x27a08086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000088 chip=0x27a18086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = PCI-PCI
none0@pci0:7:0:	class=0x110100 card=0x00000000 chip=0x27a38086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = dasp
none1@pci0:27:0:	class=0x040300 card=0x76808384 chip=0x27d88086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) High Definition Audio'
    class    = multimedia
pcib2@pci0:28:0:	class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:28:1:	class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib4@pci0:28:2:	class=0x060400 card=0x00000040 chip=0x27d48086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x72708086 chip=0x27c88086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x72708086 chip=0x27c98086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x72708086 chip=0x27ca8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:	class=0x0c0300 card=0x72708086 chip=0x27cb8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:	class=0x0c0320 card=0x72708086 chip=0x27cc8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
pcib5@pci0:30:0:	class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x72708086 chip=0x27b98086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM (ICH7-M) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:	class=0x01018a card=0x72708086 chip=0x27df8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class    = mass storage
    subclass = ATA
atapci1@pci0:31:2:	class=0x01018f card=0x72708086 chip=0x27c48086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
    class    = mass storage
    subclass = ATA
none2@pci0:31:3:	class=0x0c0500 card=0x72708086 chip=0x27da8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none3@pci1:0:0:	class=0x030000 card=0x0080106b chip=0x71c51002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = display
    subclass = VGA
myk0@pci2:0:0:	class=0x020000 card=0x532111ab chip=0x436211ab rev=0x22 hdr=0x00
    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device   = '88E8053 Yukon PCI-E Gigabit Ethernet Controller (copper)'
    class    = network
    subclass = ethernet
none4@pci3:0:0:	class=0x028000 card=0x00000000 chip=0x0024168c rev=0x01 hdr=0x00
    vendor   = 'Atheros Communications Inc.'
    class    = network
fwohci0@pci12:3:0:	class=0x0c0010 card=0x00000000 chip=0x8025104c rev=0x01 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB82AA2 1394b OHCI-Lynx IEEE 1394 Host Controller'
    class    = serial bus
    subclass = FireWire

# usbdevs -a:
Code: 
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 40 mA, config 1, Apple Internal Keyboard / Trackpad(0x021b), Apple Computer(0x05ac), rev 0.13
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc01d), Logitech(0x046d), rev 21.00
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, IR Receiver(0x8240), Apple Computer, Inc.(0x05ac), rev 1.10
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, product 0x1000(0x1000), vendor 0x05ac(0x05ac), rev 19.65
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
 port 1 addr 2: high speed, power 80 mA, config 1, USB Mass Storage Device(0xba63), PRETEC Technology(0x4146), rev 1.00
 port 2 powered
 port 3 powered
 port 4 addr 3: high speed, power 100 mA, config 1, Built-in iSight(0x8501), Micron(0x05ac), rev 1.84
 port 5 powered
 port 6 powered
 port 7 powered
 port 8 powered
 
Danke. Endlich mal Informationen. Aber warum auf zwei Beiträge verteilt?
 
@asg weil ich meinen Postcount hohzählen will! ;-)
 
@paefchen
Das kann ich auch ;-)
 
Nicht wenn ich eure Beiträge lösche weil ihr spammt, dafür ist die Bar da... ;)

MfG, juniorclub.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.
Zurück
Oben Unten