sashthebash
Mitglied
Thread Starter
- Dabei seit
- 16.08.2007
- Beiträge
- 29
- Reaktionspunkte
- 0
Hallo,
bin gerade auf den Mac umgestiegen und bekomme leider mein VPN nicht zum Laufen. Der Server steht und das Setup funktioniert mit einer Windows Maschine auch ohne Probleme.
Die Client Config sieht so aus:
Der Output von Tunnelblick ist folgender:
Sieht soweit ganz gut aus... unter Win sagt er mir am Ende beim erfolgreichen Verbinden auch Initialization Sequence Completed. Wenn ich nun aber ein Ping ausführen möchte kommt:
Hier noch die Ausgabe von ifconfig:
Ich habe ein aktuelles MBP. Außerdem noch Fusion und HamachiX installiert (erklärt vielleicht ifconfig Einträge).
Wäre super wenn mir da jemand helfen könnte. Auf meinem Windows Rechner läuft dieses Setup ohne Probleme :/.
Danke,
Sascha
bin gerade auf den Mac umgestiegen und bekomme leider mein VPN nicht zum Laufen. Der Server steht und das Setup funktioniert mit einer Windows Maschine auch ohne Probleme.
Die Client Config sieht so aus:
Code:
tls-client
client
dev tun
proto udp
tun-mtu 1400
remote xxx 1194
pkcs12 Sascha.p12
cipher BF-CBC
comp-lzo
verb 3
ns-cert-type server
Der Output von Tunnelblick ist folgender:
Code:
Tue 09/11/07 06:55 PM: IMPORTANT: OpenVPN's default port number is now 1194
Tue 09/11/07 06:55 PM: WARNING: file 'Sascha.p12' is group or others accessible
Tue 09/11/07 06:55 PM: LZO compression initialized
Tue 09/11/07 06:55 PM: WARNING: normally if you use --mssfix and/or --fragment
Tue 09/11/07 06:55 PM: Control Channel MTU parms [ L:1442 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue 09/11/07 06:55 PM: Data Channel MTU parms [ L:1442 D:1442 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue 09/11/07 06:55 PM: Local Options hash (VER=V4): 'a6ae7d69'
Tue 09/11/07 06:55 PM: Expected Remote Options hash (VER=V4): '006a55ce'
Tue 09/11/07 06:55 PM: UDPv4 link local (bound): [undef]:1194
Tue 09/11/07 06:55 PM: UDPv4 link remote: xxx:1194
Tue 09/11/07 06:55 PM: TLS: Initial packet from xxx:1194
Tue 09/11/07 06:55 PM: VERIFY OK: depth=1
Tue 09/11/07 06:55 PM: VERIFY OK: nsCertType=SERVER
Tue 09/11/07 06:55 PM: VERIFY OK: depth=0
Tue 09/11/07 06:55 PM: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
Tue 09/11/07 06:55 PM: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue 09/11/07 06:55 PM: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
Tue 09/11/07 06:55 PM: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
Tue 09/11/07 06:55 PM: Control Channel: TLSv1
Tue 09/11/07 06:55 PM: [xxx.org] Peer Connection Initiated with xxx:1194
Tue 09/11/07 06:55 PM: SENT CONTROL [xxx.org]: 'PUSH_REQUEST' (status=1)
Tue 09/11/07 06:55 PM: PUSH: Received control message: 'PUSH_REPLY
Tue 09/11/07 06:55 PM: OPTIONS IMPORT: timers and/or timeouts modified
Tue 09/11/07 06:55 PM: OPTIONS IMPORT: --ifconfig/up options modified
Tue 09/11/07 06:55 PM: OPTIONS IMPORT: route options modified
Tue 09/11/07 06:55 PM: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
Tue 09/11/07 06:55 PM: gw 192.168.10.111
Tue 09/11/07 06:55 PM: TUN/TAP device /dev/tun0 opened
Tue 09/11/07 06:55 PM: /sbin/ifconfig tun0 delete
Tue 09/11/07 06:55 PM: NOTE: Tried to delete pre-existing tun/tap instance -- No Problem if failure
Tue 09/11/07 06:55 PM: /sbin/ifconfig tun0 10.0.10.10 10.0.10.9 mtu 1400 netmask 255.255.255.255 up
Tue 09/11/07 06:55 PM: /Users/sk/Desktop/Tunnelblick.app/Contents/Resources/client.up.osx.sh tun0 1400 1442 10.0.10.10 10.0.10.9 init
Tue 09/11/07 06:55 PM: /sbin/route add -net 10.0.1.0 10.0.10.9 255.255.255.0
Tue 09/11/07 06:55 PM: /sbin/route add -net 10.0.3.0 10.0.10.9 255.255.255.0
Tue 09/11/07 06:55 PM: /sbin/route add -net 10.0.10.1 10.0.10.9 255.255.255.255
Tue 09/11/07 06:55 PM: Initialization Sequence Completed
Sieht soweit ganz gut aus... unter Win sagt er mir am Ende beim erfolgreichen Verbinden auch Initialization Sequence Completed. Wenn ich nun aber ein Ping ausführen möchte kommt:
Code:
sascha:~ sk$ ping 10.0.3.100
PING 10.0.3.100 (10.0.3.100): 56 data bytes
ping: sendto: Host is down
ping: sendto: Host is down
^C
Hier noch die Ausgabe von ifconfig:
Code:
sascha:~ sk$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1b:63:98:67:e6
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
tunnel inet -->
inet6 fe80::21c:b3ff:febc:b55d%en1 prefixlen 64 scopeid 0x5
inet 192.168.10.9 netmask 0xffffff00 broadcast 192.168.10.255
ether 00:1c:b3:bc:b5:5d
media: autoselect status: active
supported media: autoselect
vlan: 0 parent interface: <none>
bond interfaces: <none>
wlt1: flags=41<UP,RUNNING> mtu 1500
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1c:b3:ff:fe:81:34:90
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.231.1 netmask 0xffffff00 broadcast 172.16.231.255
ether 00:50:56:c0:00:08
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.82.1 netmask 0xffffff00 broadcast 172.16.82.255
ether 00:50:56:c0:00:01
tun0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1400
inet 10.0.10.10 --> 10.0.10.9 netmask 0xffffffff
open (pid 299)
tap0: flags=8842<BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 74:61:70:00:00:00
closed
tun1: flags=8850<POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500
closed
Ich habe ein aktuelles MBP. Außerdem noch Fusion und HamachiX installiert (erklärt vielleicht ifconfig Einträge).
Wäre super wenn mir da jemand helfen könnte. Auf meinem Windows Rechner läuft dieses Setup ohne Probleme :/.
Danke,
Sascha