Hallo zusammen,
ich habe einige Filme, die als SVCD vorliegen. Ich kann diese mounten mit dem Toast 6. Ich habe sonst den VLC Player, aber mit diesem kommt die Meldung:
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
avi: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
ts_dvbpsi: cannot peek()
access_file: read failed (Input/output error)
ts: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
flac: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
id3tag: cannot peek()
access_file: read failed (Input/output error)
id3: cannot peek()
access_file: read failed (Input/output error)
mpga: cannot peek
access_file: read failed (Input/output error)
mpgv: cannot peek
access_file: read failed (Input/output error)
(Input/output error)
pva: cannot peek
Es sieht so aus, wie dass er keinen Lesezugriff hat. Kann das sein? Gibt es da etwas besseres, um dies anzuschauen?
Grez Marc
ich habe einige Filme, die als SVCD vorliegen. Ich kann diese mounten mit dem Toast 6. Ich habe sonst den VLC Player, aber mit diesem kommt die Meldung:
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
avi: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
ts_dvbpsi: cannot peek()
access_file: read failed (Input/output error)
ts: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
flac: cannot peek()
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
access_file: read failed (Input/output error)
id3tag: cannot peek()
access_file: read failed (Input/output error)
id3: cannot peek()
access_file: read failed (Input/output error)
mpga: cannot peek
access_file: read failed (Input/output error)
mpgv: cannot peek
access_file: read failed (Input/output error)
(Input/output error)
pva: cannot peek
Es sieht so aus, wie dass er keinen Lesezugriff hat. Kann das sein? Gibt es da etwas besseres, um dies anzuschauen?
Grez Marc