Hallo,
mein Problem: ich komm nach hause zurück, schalte den Rechner aus dem Ruhezustand an, Bildschirm bleibt blau, Lüfter heult hoch, nix passiert; nach fünf minuten ohne veränderung schalte ich den Rechner aus und alles beim alten, bis auf, das mir diese fehlermeldung angezeigt wird:
________________
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002D37FF5B PC=0x00000000002FD548
Latest crash info for cpu 0:
Exception state (sv=0x3CC0A000)
PC=0x002FD548; MSR=0x00009030; DAR=0x2D37FF5B; DSISR=0x40000000; LR=0x002FD5A4; R1=0x21E1BC20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002FD5A4 0x002FED2C 0x002B5944 0x002E9794 0x0008B950 0x000291C0
0x000233AC 0x000AC02C 0x92A5100C
backtrace terminated - frame not mapped or invalid: 0xBFFFC220
Proceeding back via exception chain:
Exception state (sv=0x3CC0A000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3CFFD280)
PC=0x9000B208; MSR=0x0200F030; DAR=0x05E94000; DSISR=0x42000000; LR=0x9000B15C; R1=0xBFFFC220; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3CC0A000)
PC=0x002FD548; MSR=0x00009030; DAR=0x2D37FF5B; DSISR=0x40000000; LR=0x002FD5A4; R1=0x21E1BC20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002FD5A4 0x002FED2C 0x002B5944 0x002E9794 0x0008B950 0x000291C0
0x000233AC 0x000AC02C 0x92A5100C
backtrace terminated - frame not mapped or invalid: 0xBFFFC220
Exception state (sv=0x3CFFD280)
PC=0x9000B208; MSR=0x0200F030; DAR=0x05E94000; DSISR=0x42000000; LR=0x9000B15C; R1=0xBFFFC220; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
Model: PowerMac12,1, BootROM 5.2.6f1, 1 processors, PowerPC G5 (3.1), 2.1 GHz, 1.5 GB
Graphics: ATI Radeon X600 XT, ATY,RV380, PCI, 128 MB
Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
Memory Module: DIMM1/J6700, 1 GB, DDR2 SDRAM, PC2-4200U-444
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Bluetooth: Version 1.7.0f18, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: ATY,RV380, Display, PCI-E
Serial ATA Device: Maxtor 6L250M0, 233.76 GB
Parallel ATA Device: MATSHITADVD-R UJ-846,
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
________________
irgend welche ideen? ist das besorgnis erregend?
danke und gruß
simon
mein Problem: ich komm nach hause zurück, schalte den Rechner aus dem Ruhezustand an, Bildschirm bleibt blau, Lüfter heult hoch, nix passiert; nach fünf minuten ohne veränderung schalte ich den Rechner aus und alles beim alten, bis auf, das mir diese fehlermeldung angezeigt wird:
________________
Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000002D37FF5B PC=0x00000000002FD548
Latest crash info for cpu 0:
Exception state (sv=0x3CC0A000)
PC=0x002FD548; MSR=0x00009030; DAR=0x2D37FF5B; DSISR=0x40000000; LR=0x002FD5A4; R1=0x21E1BC20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002FD5A4 0x002FED2C 0x002B5944 0x002E9794 0x0008B950 0x000291C0
0x000233AC 0x000AC02C 0x92A5100C
backtrace terminated - frame not mapped or invalid: 0xBFFFC220
Proceeding back via exception chain:
Exception state (sv=0x3CC0A000)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x3CFFD280)
PC=0x9000B208; MSR=0x0200F030; DAR=0x05E94000; DSISR=0x42000000; LR=0x9000B15C; R1=0xBFFFC220; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
panic(cpu 0 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 0:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8384 0x000ABD00
Proceeding back via exception chain:
Exception state (sv=0x3CC0A000)
PC=0x002FD548; MSR=0x00009030; DAR=0x2D37FF5B; DSISR=0x40000000; LR=0x002FD5A4; R1=0x21E1BC20; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x002FD5A4 0x002FED2C 0x002B5944 0x002E9794 0x0008B950 0x000291C0
0x000233AC 0x000AC02C 0x92A5100C
backtrace terminated - frame not mapped or invalid: 0xBFFFC220
Exception state (sv=0x3CFFD280)
PC=0x9000B208; MSR=0x0200F030; DAR=0x05E94000; DSISR=0x42000000; LR=0x9000B15C; R1=0xBFFFC220; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.4.0: Tue Jan 3 18:22:10 PST 2006; root:xnu-792.6.56.obj~1/RELEASE_PPC
Model: PowerMac12,1, BootROM 5.2.6f1, 1 processors, PowerPC G5 (3.1), 2.1 GHz, 1.5 GB
Graphics: ATI Radeon X600 XT, ATY,RV380, PCI, 128 MB
Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
Memory Module: DIMM1/J6700, 1 GB, DDR2 SDRAM, PC2-4200U-444
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Bluetooth: Version 1.7.0f18, 2 service, 1 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: ATY,RV380, Display, PCI-E
Serial ATA Device: Maxtor 6L250M0, 233.76 GB
Parallel ATA Device: MATSHITADVD-R UJ-846,
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: iPod, Apple, Up to 480 Mb/sec, 500 mA
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
________________
irgend welche ideen? ist das besorgnis erregend?
danke und gruß
simon
