mogano
Aktives Mitglied
Thread Starter
- Dabei seit
- 24.01.2004
- Beiträge
- 720
- Reaktionspunkte
- 24
Hallo,
mein Rechner wacht sehr oft aus dem Ruhezustand auf, ich höre das immer, wenn ich in der Nähe bin oder sehe den Bildschirm aufleuchten. Andere Macs haben dieses Verhalten nicht, wenn ich die von Hand in den Ruhezustand bringe, bleiben die so bis ich sie aufwecke.
Ich hab die Energiespareinstellungn schon mal so eingestellt, dass die HD nicht mehr in den Ruhezustand versetzt wird, alle anderen Einstellungen sind wie beim Standard.
Ich würd gern verstehen, was das verursacht und hab mir die Meldungen in der Konsole mal angesehen.
Leider sagt mir das nichts..Wer kann sich das mal ansehen und mir sagen, was dieses Aufwachen verursacht?
Hier die Logs von einem solchen kurzen Aufwacher:
04.06.16 13:34:41 kernel Wake reason = RTC EHC1
04.06.16 13:34:41 kernel RTC: maintenance alarm 2016/6/4 11:34:40, sleep 2016/6/4 09:34:45
04.06.16 13:34:41 kernel System Wake
04.06.16 13:34:41 kernel Previous Sleep Cause: 5
04.06.16 13:34:41 kernel The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
04.06.16 13:34:41 kernel The USB device USB2.0 Hub (Port 4 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
04.06.16 13:34:45 ntpd[33] bind() fd 25, family 30, port 123, scope 4, addr fe80::9284:dff:fef8:ab8e, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
04.06.16 13:34:45 ntpd[33] unable to create socket on en0 (142) for fe80::9284:dff:fef8:ab8e#123
04.06.16 13:34:47 kernel AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
04.06.16 13:34:47 kernel Ethernet [AppleBCM5701Ethernet]: Link down on en0
04.06.16 13:34:47 kernel Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2f00,0de1,0300,cde1,7800]
04.06.16 13:34:47 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:47 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:47 configd[14] network configuration changed.
04.06.16 13:34:47 configd[14] setting hostname to "imac27.fritz.box"
04.06.16 13:34:48 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:59 kernel Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled)
04.06.16 13:35:01 kernel Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,2300,0181,0000,cde1,0000]
04.06.16 13:35:01 kernel System Sleep
04.06.16 13:35:01 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:35:01 ntpd[33] sendto(17.253.54.125) (fd=26): Can't assign requested address
04.06.16 13:35:01 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:35:01 configd[14] arp_client_transmit(en0) failed, Network is down (50)
04.06.16 13:35:01 configd[14] bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
04.06.16 13:35:01 configd[14] DHCP en0: INIT-REBOOT transmit failed
04.06.16 13:35:01 configd[14] DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
04.06.16 13:35:01 configd[14] network configuration changed.
04.06.16 13:35:01 configd[14] setting hostname to "iMac27.local"
Was verursacht diese Aufwacher???
mein Rechner wacht sehr oft aus dem Ruhezustand auf, ich höre das immer, wenn ich in der Nähe bin oder sehe den Bildschirm aufleuchten. Andere Macs haben dieses Verhalten nicht, wenn ich die von Hand in den Ruhezustand bringe, bleiben die so bis ich sie aufwecke.
Ich hab die Energiespareinstellungn schon mal so eingestellt, dass die HD nicht mehr in den Ruhezustand versetzt wird, alle anderen Einstellungen sind wie beim Standard.
Ich würd gern verstehen, was das verursacht und hab mir die Meldungen in der Konsole mal angesehen.
Leider sagt mir das nichts..Wer kann sich das mal ansehen und mir sagen, was dieses Aufwachen verursacht?
Hier die Logs von einem solchen kurzen Aufwacher:
04.06.16 13:34:41 kernel Wake reason = RTC EHC1
04.06.16 13:34:41 kernel RTC: maintenance alarm 2016/6/4 11:34:40, sleep 2016/6/4 09:34:45
04.06.16 13:34:41 kernel System Wake
04.06.16 13:34:41 kernel Previous Sleep Cause: 5
04.06.16 13:34:41 kernel The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
04.06.16 13:34:41 kernel The USB device USB2.0 Hub (Port 4 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
04.06.16 13:34:45 ntpd[33] bind() fd 25, family 30, port 123, scope 4, addr fe80::9284:dff:fef8:ab8e, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
04.06.16 13:34:45 ntpd[33] unable to create socket on en0 (142) for fe80::9284:dff:fef8:ab8e#123
04.06.16 13:34:47 kernel AppleBCM5701::selectMedium - autoselect, any duplex, flow control allowed
04.06.16 13:34:47 kernel Ethernet [AppleBCM5701Ethernet]: Link down on en0
04.06.16 13:34:47 kernel Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2f00,0de1,0300,cde1,7800]
04.06.16 13:34:47 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:47 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:47 configd[14] network configuration changed.
04.06.16 13:34:47 configd[14] setting hostname to "imac27.fritz.box"
04.06.16 13:34:48 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:34:59 kernel Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled)
04.06.16 13:35:01 kernel Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,2300,0181,0000,cde1,0000]
04.06.16 13:35:01 kernel System Sleep
04.06.16 13:35:01 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:35:01 ntpd[33] sendto(17.253.54.125) (fd=26): Can't assign requested address
04.06.16 13:35:01 Apple80211 framework[296] ACInterfaceGetPower called with NULL interface
04.06.16 13:35:01 configd[14] arp_client_transmit(en0) failed, Network is down (50)
04.06.16 13:35:01 configd[14] bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
04.06.16 13:35:01 configd[14] DHCP en0: INIT-REBOOT transmit failed
04.06.16 13:35:01 configd[14] DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
04.06.16 13:35:01 configd[14] network configuration changed.
04.06.16 13:35:01 configd[14] setting hostname to "iMac27.local"
Was verursacht diese Aufwacher???