powerbook g4

goebat

Mitglied
Thread Starter
Dabei seit
19.04.2002
Beiträge
84
Reaktionspunkte
0
bitte helfen ganz dringend

hi habe heute einen powerbook g4 bekommen. allerdings ist auf dem rechner OSX und OS9 installiert. wie gehe ich nun vor wenn ich os9 löschen möchte??? habe dafür keine verwendung.
 
Hallo Du!

Glückwunsch zum Kauf. Da haste ein feines Stück Hardware. Und zu Deinem Problem: Do you speak English? Ansonsten helfe ich Dir.

I wouldn't recommend trying to remove the Classic components of OS X; it's extremely difficult to root out all of the Classic components, and if you delete the wrong file, you could disable OS X. You can remove OS 9 or install OS X without OS 9. Keep in mind that this will completely eliminate the possibility of running any older software. However, if that's what you're aiming for, there are a couple of ways to do it.

One method is to drag the OS 9 System folder to the Trash, but you'll have to do it while booted from OS X or from a System CD. Then delete the Applications (Mac OS 9) folder since you won't be able to use these applications under OS X. Warning: Don't delete the OS X System folder (it's labeled System, and the folder icon has an X on it).

Another option is to install only OS X and erase the entire disk using the Installer program. (You may want to back up your data files first.) Instead of starting the OS X Installer from OS 9, boot the Mac from the Mac OS X Installer CD (hold down the C key during startup). When booted, initiate the installer. At some point, you will be given the option to erase the drive before the software installs OS X. You'll have to reinstall any OS X applications you've previously installed.
 
shit

o.k. hab schon voreilig den os 9 ordner in den müll geschmissen und gelöscht.
war wohl nicht die feine art. wenn ich von der osx cd starte mit "c" dann installiert er anstandslos das system. aber es kommt keine anfrage ob die platte vor installation gelöscht werden soll.????

clap
 
Zuletzt bearbeitet:
Wenn Du das Volume, auf dem Du installieren willst, auswählt, gibt es unten links eine Schaltfläche "Optionen". Da kannst Du es einstellen. In einem der darauffolgenden Dialoge kannst Du durch eine Schaltfläche "Anpassen" auch bestimmen, was alles installiert werden soll.
 
also nochmal von der cd booten auf installation gehen volume anwählen....
manuel installieren. ist das richtig
 
Original geschrieben von goebat
also nochmal von der cd booten auf installation gehen volume anwählen....
manuel installieren. ist das richtig
 

Volume anwählen - "Optionen" (unten links) - "Vor dem Installieren löschen" (oder s. ä.). Später kannst Du dann über "Anpassen" noch Sprachpakete und Druckertreiber rausschmeißen.
 
vielen dank im vorraus mach mich gleich an die arbeit
 
Zurück
Oben Unten