das ergibt meine Recherche auf der Toshiba Seite:
Nur ein Teil!!!
***Features
****Part number
HDD2188
****Formatted capacity
80,012MByte
****Form factor
2.5inch
****Interface type
ATAPI/IDE
****Supported interface standards
ATA-2
ATA-3
ATA-4
ATA-5
ATA-6
****Head/actuator technology
»Ramp-Load« technology
GMR head
****Shock detection
Shock sensor circuit
****S.M.A.R.T.
The S.M.A.R.T. command set is supported
****Bytes/sector
*****Bytes/sector
512
***Physical parameters
****Number of platters
2
****Number of cylinders
54,000
****Number of heads
4
***Access times
****Average seek time
12ms
****Maximum seek time
22ms
****Track-to-track seek time
2ms
***Transfer rates
****Internal
From 175 To 341.7 MBit/s
****PIO mode (Host)
PIO mode 4 (16.6 MByte/s)
****UDMA mode (Host)
UDMA mode 5 (100 MByte/s)
***Rotational speed
****Rotational speed
4,200rpm
***Buffer
****Buffer size
8,192kByte
****Cache
Read-ahead cache
Write cache
***Reaction times
****Start time (Spin-up time, typical)
4s
****Start time (Spin-up time, maximum)
10s
****Recovery time (from stand-by, typical)
4s
****Recovery time (from stand-by, maximum)
10s
**Reliability specifications
***Seek error rate
1 error per 10^6 seeks
***Non-recoverable error rate
1 error per 10^13 seeks
***MTBF
300,000Hours
***Power-on hours
2,800Hours
***Product life
5 years or 20,000 POH (whatever comes earlier)
***Preventive maintenance
No preventive maintenance is required
****Source voltage 5 V
*****Start (Maximum)
4.7W
*****Seek (Average)
2.6W
*****Read (Average)
2.3W
*****Write (Average)
2.3W
*****Low-power idle (Average)
0.7W
*****Sleep (Average)
0.1W
*****Stand-by (Average)
0.25W
***Power supply motor
****Supply voltage
+5 V (+/- 5 %)
****Allowable noise/ripple
Max. 100mV
***Power supply logic
****Supply voltage
+5 V (+/- 5 %)
****Allowable noise/ripple
Max. 100mV
***Cable
****Length ATAPI cable (Maximum)
0.46m
****Capacitance ATAPI cable (Maximum)
35pF
**Mechanical specifications
***Drive width
69.85mm
***Drive height
9.5mm
***Drive depth
100mm
***Drive weight
0.098kg
***Drive orientation
The drive can be installed in all axes (6 directions)
***Mounting instructions (Screwing)
Four screws should be tightened equally with 0.39 Nm torque. The depth should be 3.0 mm minimum and 3.5 mm maximum
***Temperature
****Operating
From 5 To 55 °C
****Non-operating
From -20 To 60 °C
****Shipping
From -40 To 70 °C
***Humidity
****Operating
From 8 To 90 %
****Non-operating
From 8 To 90 %
****Shipping
From 5 To 90 %
***Wet bulb
****Operating (Maximum)
29°C
****Non-operating (Maximum)
40°C
***Vibration
****Operating (Maximum)
1 G, with 5 - 500 Hz
****Non-operating (Maximum)
5 G, with 10 - 500 Hz
***Shock
****Operating (Maximum)
200 G, with 2 ms half sine wave
****Non-operating (Maximum)
800 G, with 1 ms half sine wave
****Shipping (Maximum)
0.7 m free drop with no unrecoverable error. Drive must be packed in Toshiba´s original shipping package. Apply shock in each direction of the drive´s three mutually perpendicular axes, one axis at a time.
***Altitude
****Operating
From -300 To 3,000 m
****Non-operating
From -400 To 15,000 m
***Acoustic noise
****Idle mode (Disk spinning)
Max. 24dB
****Random seek
Max. 31dB
**BIOS specifications
***Number of cylinders (Logical)
16,383
***Number of heads (Logical)
16
***Number of sectors/track (Logical)
63
**Safety specifications
***Safety standards
CSA C22.2, No. 950, 3rd
D 33003
EN60950
UL 60950 3rd
***EMC adaptibility
EN55022
EN61000-3-2
EN61000-3-3
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-11
ENV50204