GELÖST MacOS lässt sich nicht installieren

in dem APFS container sind normal noch ein preboot und eine recovery partition mit drin.
das werden die beiden sein.

und lies doch bitte mal die SMART werte der SSDs aus.
dazu kannst du dir das demo von drivedx laden, der erklärt auch die werte.

und dann noch toi toi toi, dass dir die AMD GPU nicht abraucht.
falls der mal nur noch mit weißen bild nach dem apfel startet, dann hat es dich erwischt…


kann ich die vorher tauschen oder dann vielleicht reparieren?

@electricdawn
danke. und wie?
 
Na ja... Sie geht halt kaputt. Kannst Dir ja schon als Ersatz einen neuen Mini holen. :D

PS: Und nein, dürfte sich kaum rentieren, die noch auszutauschen.
 
kann ich die vorher tauschen oder dann vielleicht reparieren?

es gibt diverse dienstleister, die löten dir eine neuere GPU ohne den design fehler auf.
kostet aber so um die 300€.
da musst dir überlegen, ob sich das lohnt oder ob du den nicht bis dahin nutzt und falls der ausfällt dann einen anderen gebrauchten 2012er oder so holst.
 
Fuc.... Der Verkäufer ist echt.....

Na ja. Hier die Smart Werte

für die System SSD:

### SYSTEM INFORMATION ###
Report Timestamp : 18. Februar 2019 16:05:54 GMT+1
Report Timestamp (ISO 8601 format) : 2019-02-18T16:05:54

Application Name : DriveDx
Application Version : 1.8.2.610
Application SubBuild : 1
Application Edition : Standalone
Application Website : https://binaryfruit.com/drivedx
DriveDx Knowledge Base Revision : 9/9

Computer Name : Matts Mac mini
Host Name : Matts-Mac-mini
Computer Model : Macmini5,2

OS Boot Time : 2019-02-18T15:41:41
Time Since Boot : 00h 24m 13s
OS Name : macOS
OS Version : 10.13.6
OS Build : 17G65
OS Kernel Version : Darwin 17.7.0

SAT SMART Driver Version : N/A
ATA Command Support Tolerance : verypermissive
N of drives in report : 1



### DRIVE 1 OF 1 ###
Last Checked : 18. Februar 2019 16:00:55 GMT+1
Last Checked (ISO 8601 format) : 2019-02-18T16:00:55

Advanced SMART Status : OK
Overall Health Rating : GOOD 62.9%
Overall Performance Rating : AVERAGE 62.9%
SSD Lifetime Left Indicator : GOOD 100%
Issues found : 0

Serial Number : OCZ-4VM36U331J2A9008
WWN Id : 5 e83a97 e9424b2ae
Volumes : Mac OS SSD
Device Path : /dev/disk1
Total Capacity : 240.1 GB (240.057.409.536 Bytes)
Model Family : SandForce driven SSDs
Model : OCZ-VERTEX3 MI
Firmware Version : 2.15
Drive Type : SSD

Power On Time : 13.457 hours (18 months 20 days 17 hours)
Power Cycles Count : 5.039
Current Power Cycle Time : 0.4 hours



=== DEVICE CAPABILITIES ===
S.M.A.R.T. support enabled : yes
DriveDx Active Diagnostic Config : SandForce driven SSDs config [ssd.sandforce]
Sector Logical Size : 512
Sector Physical Size : 512
Physical Interconnect : SATA
Logical Protocol : SATA
Removable : no
Ejectable : no
ATA Version : ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version : SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Bay # : 2
I/O Path : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchSeriesAHCI/PRT1@1/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice
Attributes Data Structure Revision : 10
SMART Command Transport (SCT) flags : 0x21
SCT Status supported : yes
SCT Feature Control supported : no
SCT Data Table supported : yes
Error logging capabilities : 0x1
Self-tests supported : no
Offline Data Collection capabilities : 0x7f
Offline Data Collection status : 0x0
Auto Offline Data Collection flags : 0x0
[Known device ]: yes
[Drive State Flags ]: 0x0


=== CURRENT POWER CYCLE STATISTICS ===
Data Read : 3.1 GB
Data Written : 1.3 GB
Data Read/Write Ratio : 2.38
Average Throughput (Read) : 73.7 MB/s
Average Throughput (Write) : 72.1 MB/s

Operations (Read) : 319.444
Operations (Write) : 38.455
Operations Read/Write Ratio : 8
Throughput per operation (Read) : 10.1 KB/Op
Throughput per operation (Write) : 35.0 KB/Op

Latency Time (Read) : 0 ns
Latency Time (Write) : 0 ns
Retries (Read) : 0
Retries (Write) : 0
Errors (Read) : 0
Errors (Write) : 0


=== PROBLEMS SUMMARY ===
Failed Indicators (life-span / pre-fail) : 0 (0 / 0)
Failing Indicators (life-span / pre-fail) : 0 (0 / 0)
Warnings (life-span / pre-fail) : 0 (0 / 0)
I/O Error Count : 0 (0 / 0)
Time in Under temperature : 0 minutes
Time in Over temperature : 0 minutes


=== IMPORTANT HEALTH INDICATORS ===
ID NAME RAW VALUE STATUS
5 Retired Block Count 0 100% OK
171 Program Fail Count Total 0 100% OK
172 Erase Fail Count Total 0 100% OK
177 Wear Range Delta 3 100% OK
230 Life Curve Status 0x64 100% OK
241 Lifetime Writes GiB 10.302 (10.1 TB) 100% OK


=== TEMPERATURE INFORMATION (CELSIUS) ===
Current Temperature : 30
Power Cycle Min Temperature : 30
Power Cycle Max Temperature : 30
Lifetime Min Temperature : 30
Lifetime Max Temperature : 30
Recommended Min Temperature : 5
Recommended Max Temperature : 65
Temperature Min Limit : 5
Temperature Max Limit : 70


=== DRIVE HEALTH INDICATORS ===
ID | NAME | TYPE | UPDATE | RAW VALUE | VALUE | THRESHOLD | WORST | LAST MODIFIED | STATUS
1 Raw Read Error Rate Pre-fail online 0x0 94 50 94 18.02.19 16:00 62.9% OK
5 Retired Block Count Pre-fail online 0 100 3 100 18.02.19 16:00 100% OK
9 Power On Hours and Msec Life-span online 13.457 85 0 85 18.02.19 16:00 85.0% OK
12 Power Cycle Count Life-span online 5.039 96 0 96 18.02.19 16:00 96.0% OK
171 Program Fail Count Total Life-span online 0 0 0 0 18.02.19 16:00 100% OK
172 Erase Fail Count Total Life-span online 0 0 0 0 18.02.19 16:00 100% OK
174 Unexpected Power Loss Count Life-span offline 980 0 0 0 18.02.19 16:00 100% OK
177 Wear Range Delta Life-span offline 3 0 0 0 18.02.19 16:00 100% OK
181 Program Fail Count Life-span online 0 0 0 0 18.02.19 16:00 100% OK
182 Erase Fail Count Life-span online 0 0 0 0 18.02.19 16:00 100% OK
187 Reported Uncorrectable Errors Life-span online 0 100 0 100 18.02.19 16:00 100% OK
194 Temperature (Celsius) Life-span online 30 70 30 70 18.02.19 16:00 57.1% OK
195 ECC Uncorrectable Error Count Life-span offline 0x0 120 0 120 18.02.19 16:00 100% OK
196 Reallocated Event Count Pre-fail online 0 100 3 100 18.02.19 16:00 100% OK
201 Uncorrectable Soft Read Error Rate Life-span offline 0x0 120 0 120 18.02.19 16:00 100% OK
204 Soft ECC Correct Rate Life-span offline 0x0 120 0 120 18.02.19 16:00 100% OK
230 Life Curve Status Pre-fail online 0x64 100 0 100 18.02.19 16:00 100% OK
231 SSD Life Left Pre-fail online 0 100 10 100 18.02.19 16:00 100% OK
233 Vendor Specific Life-span offline 0x3053 0 0 0 18.02.19 16:00 100% OK
234 Vendor Specific Life-span online 0x283E 0 0 0 18.02.19 16:00 100% OK
241 Lifetime Writes GiB Life-span online 10.302 (10.1 TB) 0 0 0 18.02.19 16:00 100% OK
242 Lifetime Reads GiB Life-span online 12.147 (11.9 TB) 0 0 0 18.02.19 16:00 100% OK



=== DRIVE ERROR LOG ===
error log is empty


=== DRIVE SELF-TEST LOG ===
self-test log is empty
 
und für die 2te SSD:

### SYSTEM INFORMATION ###
Report Timestamp : 18. Februar 2019 16:05:37 GMT+1
Report Timestamp (ISO 8601 format) : 2019-02-18T16:05:37

Application Name : DriveDx
Application Version : 1.8.2.610
Application SubBuild : 1
Application Edition : Standalone
Application Website : https://binaryfruit.com/drivedx
DriveDx Knowledge Base Revision : 9/9

OS Boot Time : 2019-02-18T15:41:41
Time Since Boot : 00h 23m 56s
OS Name : macOS
OS Version : 10.13.6
OS Build : 17G65
OS Kernel Version : Darwin 17.7.0

SAT SMART Driver Version : N/A
ATA Command Support Tolerance : verypermissive
N of drives in report : 1



### DRIVE 1 OF 1 ###
Last Checked : 18. Februar 2019 16:00:55 GMT+1
Last Checked (ISO 8601 format) : 2019-02-18T16:00:55

Advanced SMART Status : OK
Overall Health Rating : GOOD 100%
Overall Performance Rating : GOOD 83.3%
SSD Lifetime Left Indicator : GOOD 100%
Issues found : 0

Serial Number : OCZ-FMF6AG79NPF33QXC
WWN Id : 5 e83a97 e1ac79063
Volumes : SSD
Device Path : /dev/disk0
Total Capacity : 240.1 GB (240.057.409.536 Bytes)
Model Family : SandForce driven SSDs
Model : OCZ-VERTEX3 MI
Firmware Version : 2.15
Drive Type : SSD

Power On Time : 11.376 hours (15 months 24 days 0 hours)
Power Cycles Count : 4.645
Current Power Cycle Time : 0.4 hours



=== DEVICE CAPABILITIES ===
S.M.A.R.T. support enabled : yes
DriveDx Active Diagnostic Config : SandForce driven SSDs config [ssd.sandforce]
Sector Logical Size : 512
Sector Physical Size : 512
Physical Interconnect : SATA
Logical Protocol : SATA
Removable : no
Ejectable : no
ATA Version : ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version : SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Bay # : 1
I/O Path : IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchSeriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice
Attributes Data Structure Revision : 10
SMART Command Transport (SCT) flags : 0x21
SCT Status supported : yes
SCT Feature Control supported : no
SCT Data Table supported : yes
Error logging capabilities : 0x1
Self-tests supported : no
Offline Data Collection capabilities : 0x7f
Offline Data Collection status : 0x0
Auto Offline Data Collection flags : 0x0
[Known device ]: yes
[Drive State Flags ]: 0x0


=== CURRENT POWER CYCLE STATISTICS ===
Data Read : 7.7 MB
Data Written : 7.6 MB
Data Read/Write Ratio : 1.01
Average Throughput (Read) : 176.7 MB/s
Average Throughput (Write) : 75.9 MB/s

Operations (Read) : 159
Operations (Write) : 478
Operations Read/Write Ratio : 0
Throughput per operation (Read) : 49.3 KB/Op
Throughput per operation (Write) : 16.2 KB/Op

Latency Time (Read) : 0 ns
Latency Time (Write) : 0 ns
Retries (Read) : 0
Retries (Write) : 0
Errors (Read) : 0
Errors (Write) : 0


=== PROBLEMS SUMMARY ===
Failed Indicators (life-span / pre-fail) : 0 (0 / 0)
Failing Indicators (life-span / pre-fail) : 0 (0 / 0)
Warnings (life-span / pre-fail) : 0 (0 / 0)
I/O Error Count : 0 (0 / 0)
Time in Under temperature : 0 minutes
Time in Over temperature : 0 minutes


=== IMPORTANT HEALTH INDICATORS ===
ID NAME RAW VALUE STATUS
5 Retired Block Count 0 100% OK
171 Program Fail Count Total 0 100% OK
172 Erase Fail Count Total 0 100% OK
177 Wear Range Delta 2 100% OK
230 Life Curve Status 0x64 100% OK
241 Lifetime Writes GiB 5.179 (5.1 TB) 100% OK


=== TEMPERATURE INFORMATION (CELSIUS) ===
Current Temperature : 30
Power Cycle Min Temperature : 30
Power Cycle Max Temperature : 30
Lifetime Min Temperature : 30
Lifetime Max Temperature : 30
Recommended Min Temperature : 5
Recommended Max Temperature : 65
Temperature Min Limit : 5
Temperature Max Limit : 70


=== DRIVE HEALTH INDICATORS ===
ID | NAME | TYPE | UPDATE | RAW VALUE | VALUE | THRESHOLD | WORST | LAST MODIFIED | STATUS
1 Raw Read Error Rate Pre-fail online 0x0 120 50 120 18.02.19 16:00 100% OK
5 Retired Block Count Pre-fail online 0 100 3 100 18.02.19 16:00 100% OK
9 Power On Hours and Msec Life-span online 11.376 88 0 88 18.02.19 16:00 88.0% OK
12 Power Cycle Count Life-span online 4.645 96 0 96 18.02.19 16:00 96.0% OK
171 Program Fail Count Total Life-span online 0 0 0 0 18.02.19 16:00 100% OK
172 Erase Fail Count Total Life-span online 0 0 0 0 18.02.19 16:00 100% OK
174 Unexpected Power Loss Count Life-span offline 167 0 0 0 18.02.19 16:00 100% OK
177 Wear Range Delta Life-span offline 2 0 0 0 18.02.19 16:00 100% OK
181 Program Fail Count Life-span online 0 0 0 0 18.02.19 16:00 100% OK
182 Erase Fail Count Life-span online 0 0 0 0 18.02.19 16:00 100% OK
187 Reported Uncorrectable Errors Life-span online 0 100 0 100 18.02.19 16:00 100% OK
194 Temperature (Celsius) Life-span online 30 70 30 70 18.02.19 16:00 57.1% OK
195 ECC Uncorrectable Error Count Life-span offline 0x0 100 0 100 18.02.19 16:00 83.3% OK
196 Reallocated Event Count Pre-fail online 0 100 3 100 18.02.19 16:00 100% OK
201 Uncorrectable Soft Read Error Rate Life-span offline 0x0 100 0 100 18.02.19 16:00 83.3% OK
204 Soft ECC Correct Rate Life-span offline 0x0 100 0 100 18.02.19 16:00 83.3% OK
230 Life Curve Status Pre-fail online 0x64 100 0 100 18.02.19 16:00 100% OK
231 SSD Life Left Pre-fail online 0 100 10 100 18.02.19 16:00 100% OK
233 Vendor Specific Life-span offline 0x1443 0 0 0 18.02.19 16:00 100% OK
234 Vendor Specific Life-span online 0x143B 0 0 0 18.02.19 16:00 100% OK
241 Lifetime Writes GiB Life-span online 5.179 (5.1 TB) 0 0 0 18.02.19 16:00 100% OK
242 Lifetime Reads GiB Life-span online 6.334 (6.2 TB) 0 0 0 18.02.19 16:00 100% OK



=== DRIVE ERROR LOG ===
error log is empty


=== DRIVE SELF-TEST LOG ===
self-test log is empty
 
Hi,
diese SSD's sind OK..
 
gut. ich danke noch mal allen die mir geholfen haben. betreff dem umschalten am display, mache ich, wie empfohlen, einen neuen tread auf.
 
Hi,
wenn das Problem mit dem Lüfter weiter hin besteht, zuerst die WLP auswechseln, ansonsten einen neuen Lüfter einbauen.

Franz
 
Hi,
wenn das Problem mit dem Lüfter weiter hin besteht, zuerst die WLP auswechseln, ansonsten einen neuen Lüfter einbauen.

Franz
WLP gleich wärmeleitpaste? soll ich also die CPU lösen? oder könntest Du mir vielleicht einen Artikel oder ein HowTo verlinken? Bin nciht sicher auf welches Bauteil Du dich da beziehst.
 
Hi,
ich beziehe mich auf den Kühlkörper, der den Prozessor u Grafikprozessor kühlt, aber bei dieser Demontage u Montage des Locigboard's, unbedinngt ein Antistatik Armband verwenden, das ganze ist doch etwas heikel, so ein Antistatikteil gibts bei E***y schon für ca 5-10€, das sollte es einem Wert sein, schau doch mal bei ifixit.com nach deinem MacMini, dort ist alles gut bebildert.

Franz
 
habe PRAM mit Windows logo+alt+p+r gemacht. keine verbesserung. SMC war nur stecker ziehen und 15sek warten. auch gemacht. mini bleibt laut. werde wohl noch lüfter und werkzeug bestellen müssen.
 
Hi,
wenn du schon den Lüfter auswechselst, dann auch die WLP=Wärmeleitpaste mitmachen, da wird bei Apple sehr gerne geschlampt, aber Vorsichtig Hantieren, die Halteteile für den Kühlkörper sind zum Teil aus Kunststoff und brechen gerne ab.

Franz
 
  • Gefällt mir
Reaktionen: electricdawn
Hi,
wenn du schon den Lüfter auswechselst, dann auch die WLP=Wärmeleitpaste mitmachen, da wird bei Apple sehr gerne geschlampt, aber Vorsichtig Hantieren, die Halteteile für den Kühlkörper sind zum Teil aus Kunststoff und brechen gerne ab.

Franz
werd ich beides angehen. suche bei AMZn gerade nach Lüfter und Werkzeug. Paste habe ich noch vom Serverbau.
 
  • Gefällt mir
Reaktionen: dg2rbf
Ok,
dann viel Erfolg bei dieser Aktion.

Franz
 
So, wollte zur Sicherheit Mal den Apple Hardware Test laufen lassen. Bekomme Fehler.

IMG_20190218_173900.jpg


15505078055402191057353780024479.jpg
 
Hi,
das ist aber ein seltsamer Fehler, ist das der orginal AppleHardwaretest für dieses Model ?
 
ein 2011er müsste doch noch den AHT und nicht apple diagnostic haben…
 
Hab jetzt Windows+alt+umschalt gedrückt und da war er der Hardwaretest. Seltsam. Wollte dich den SMC zurück setzen.

Wie geht der smc am Mac Mini denn nun?
 
Hi,
wie der SMC-Reset an deinem Mini funktioniert weis ich nicht, hab ein noch älteres Modell mit externem Netzeil, da mußt du mal bei Apple oder Google suchen.

Franz
 
Zurück
Oben Unten