Dateien über Terminal finden

kratistos

Neues Mitglied
Thread Starter
Dabei seit
28.04.2020
Beiträge
10
Reaktionspunkte
1
Hallo zusammen,

ich hatte mal einen tollen Artikel gefunden, der beschrieb, wie ich alle Dateien auf meinem Macbook über den Terminal durchforsten konnte. Leider finde ich ihn nicht mehr.
Er sah so in der Art aus: befehl > gesamtinhalt des laptops wurde angezeigt > von dort konnte ich über weitere befehle tiefer in die ordner gehen. Zu jedem Ordner wurde auch immer die Größe angezeigt.

Weiß jemand von euch vielleicht, wie diese Befehle lauten?

Vielen Dank im Voraus und liebe Grüße
 
locate

Code:
locate(1) - Linux man page

Name

locate - find files by name
Synopsis

locate [OPTION]... PATTERN...

Description

locate reads one or more databases prepared by updatedb(8) and writes file names matching at least one of the PATTERNs to standard output, one per line.
If --regex is not specified, PATTERNs can contain globbing characters. If any PATTERN contains no globbing characters, locate behaves as if the pattern were *PATTERN*.

By default, locate does not check whether files found in database still exist. locate can never report files created after the most recent update of the relevant database.

Exit Status

locate exits with status 0 if any match was found or if locate was invoked with one of the --limit 0, --help, --statistics or --version options. If no match was found or a fatal error was encountered, locate exits with status 1.
Errors encountered while reading a database are not fatal, search continues in other specified databases, if any.

Options

-b, --basename
Match only the base name against the specified patterns. This is the opposite of --wholename.
-c, --count
Instead of writing file names on standard output, write the number of matching entries only.
-d, --database DBPATH
Replace the default database with DBPATH. DBPATH is a :-separated list of database file names. If more than one --database option is specified, the resulting path is a concatenation of the separate paths.
An empty database file name is replaced by the default database. A database file name - refers to the standard input. Note that a database can be read from the standard input only once.

-e, --existing
Print only entries that refer to files existing at the time locate is run.
-L, --follow
When checking whether files exist (if the --existing option is specified), follow trailing symbolic links. This causes broken symbolic links to be omitted from the output.
This is the default behavior. The opposite can be specified using --nofollow.

-h, --help
Write a summary of the available options to standard output and exit successfully.
-i, --ignore-case
Ignore case distinctions when matching patterns.
-l, --limit, -n LIMIT
Exit successfully after finding LIMIT entries. If the --count option is specified, the resulting count is also limited to LIMIT.
-m, --mmap
Ignored, for compatibility with BSD and GNU locate.
-P, --nofollow, -H
When checking whether files exist (if the --existing option is specified), do not follow trailing symbolic links. This causes broken symbolic links to be reported like other files.
This is the opposite of --follow.

-0, --null
Separate the entries on output using the ASCII NUL character instead of writing each entry on a separate line. This option is designed for interoperability with the --null option of GNU xargs(1).
-S, --statistics
Write statistics about each read database to standard output instead of searching for files and exit successfully.
-q, --quiet
Write no messages about errors encountered while reading and processing databases.
-r, --regexp REGEXP
Search for a basic regexp REGEXP. No PATTERNs are allowed if this option is used, but this option can be specified multiple times.
--regex
Interpret all PATTERNs as extended regexps.
-s, --stdio
Ignored, for compatibility with BSD and GNU locate.
-V, --version
Write information about the version and license of locate on standard output and exit successfully.
-w, --wholename
Match only the whole path name against the specified patterns.
This is the default behavior. The opposite can be specified using --basename.

Examples

To search for a file named exactly NAME (not *NAME*), use
locate -b '\NAME'
Because \ is a globbing character, this disables the implicit replacement of NAME by *NAME*.
Files

/var/lib/mlocate/mlocate.db
The database searched by default.
Environment

LOCATE_PATH
Path to additional databases, added after the default database or the databases specified using the --database option.
Notes

The order in which the requested databases are processed is unspecified, which allows locate to reorder the database path for security reasons.
locate attempts to be compatible to slocate (without the options used for creating databases) and GNU locate, in that order. This is the reason for the impractical default --follow option and for the confusing set of --regex and --regexp options.

The short spelling of the -r option is incompatible to GNU locate, where it corresponds to the --regex option. Use the long option names to avoid confusion.

The LOCATE_PATH environment variable replaces the default database in BSD and GNU locate, but it is added to other databases in this implementation and slocate.

Author

Miloslav Trmac <mitr@redhat.com>
See Also

updatedb(8)
Referenced By

find(1), gnome-search-tool(1), intro(1), mlocate.db(5), updatedb.conf(5)
 
Ich denke, der TE meint eher
ls -la
da er ja die Ordner immer tiefer durchforsten will.
 
macht auch Sinn, aber locate ist auf jedenfall nützlich
 
  • Gefällt mir
Reaktionen: Schiffversenker
das problem mit locate ist nur, es braucht eine datenbank, die man erst mal erstellen muss.
ist ja nicht mehr standard auf macOS und /usr/libexec/locate.updatedb muss man selbst erst mal ausführen, am besten noch mit sudo.
 
das schreibt locate beim ersten ausführen, das sollte man dann auch hinbekommen.
 
hallo zusammen,

vielen Dank für euer Feedback!
ls -la kommt dem recht nah. Es war aber ein anderer Befehl. Ich konnte damit, wie mit ls -la, die Ordner anzeigen lassen (samt Größe des jeweiligen Ordners) und dann immer tiefer in diese Ordner reingehen.
Gibt es noch einen anderen Befehl dafür?

Vielen Dank und liebe Grüße
Emanuel
 
Das war dann wohl 'du'.
 
nein, da listet er mir unzählige daten/ordner. bei meinem befehl fing es ganz oben an (mit schreibtisch, downloads, etc.) und dann konnte ich tiefer reingehen.
 
Wenn ls passt, müsstes du mit cd dann immer eine Ebene tiefer steigen.
Eine komplette Anzeige des Verzeichnisbaums kannst du mit
tree
erreichen (sofern ich mich nicht total täusche).
Ich glaube aber, diesen Befehl muß man sich erst irgendwo von einer UNI-Kommando-Seite laden.
Nur so eine Idee, auf dem aktuellen Mac scheine ich tree nicht installiert zu haben.
Und bin im Moment zu faul und zu müde, weiterzumachen.
 
Hi Schiffversenker,

das sieht gut aus. Allerdings fehlen mir hier die Dateigrößen. Die werden bei den Befehlen nicht angezeigt.
Bei dem Befehl, den ich meine, wurden die Ordner untereinander angezeigt und daneben jeweils die Größe. Dann konnte ich ähnlich wie mit cd immer tiefer reingehen.
 
das schreibt locate beim ersten ausführen, das sollte man dann auch hinbekommen.
Wieso locate wenn ich mdfind hab? Die Datenbank erstellt/verwaltet macOS immerhin selbst.
Und falls ich bewusst was nicht-DB-basiertes will, dann hilft mir eh nur find.
 
  • Gefällt mir
Reaktionen: bruderlos
Wenn Du eine Baumstruktur haben willst. Dann installiere "tree": brew install tree

tree -hg Documents/

Ansonsten noch:
df -h
du -hcs ordner/*
du -ah Documents/ | sort -n
 
  • Gefällt mir
Reaktionen: dg2rbf und redfootthefence
Uhm... ls -Rahl
ls -RAhl geht auch und ist "etwas" kompakter.
 
  • Gefällt mir
Reaktionen: warnochfrei
Das ist dann wieder shellabhängig und zeigt keine Größen an.
 
Zurück
Oben Unten