Wer kennt ein gutes Tool mit dem man eine Festplatte analysieren kann?

Huitzilopochtli

Mitglied
Thread Starter
Dabei seit
30.07.2003
Beiträge
57
Reaktionspunkte
0
Hallo,

nachdem das Festplattendienstprogramm ja nicht gerade viel über eine möglicherweise defekte Platte aussagt, bräuchte ich eine Alternative um eventuelle Hardwaredefekte an der Festplatte auszuschließen. Wer kennt ein gutes Programm?

Viele Grüße
 
@geronimoTwo:
Bis sich der TE jetzt wieder meldet: Wollen wir mal knobeln, was seine nächste Frage sein wird? ;)
Gruss
der eMac_man
 
Bin dabei:

»Gibt's auch was umso....« :D:D:D
 
Menno! Das war ja ne schnelle Runde.
Na gut, zurück zum Thema.
Gruss
der eMac_man
 
Menno! Das war ja ne schnelle Runde.
Na gut, zurück zum Thema.
Gruss
der eMac_man

Dabei bist du mir um 18000 Antworten voraus!
apfel33x19.gif
 
smartmontools. Opensource, frei, und das beste was ich bisher gefunden habe, um die S.M.A.R.T.-Werte[1] einer Festplatte auszulesen:

Code:
 xenon@ radon / 524
 $ smartctl -a /dev/rdisk0
smartctl version 5.38 [i386-apple-darwin9.5.0] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD3200BEKT-22F3T0
Serial Number:    WD-WXE608PE5454
Firmware Version: 11.01A11
User Capacity:    320,072,933,376 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Fri Jul 23 17:39:00 2010 MDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (8400) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 100) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   178   176   021    Pre-fail  Always       -       2091
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3749
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       5847
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2836
192 Power-Off_Retract_Count 0x0032   198   198   000    Old_age   Always       -       1640
193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       4685
194 Temperature_Celsius     0x0022   101   096   000    Old_age   Always       -       46
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      3920         -
# 2  Extended offline    Aborted by host               20%      3918         -
# 3  Extended offline    Completed without error       00%      1707         -
# 4  Extended offline    Completed without error       00%      1092         -
# 5  Extended offline    Completed without error       00%        21         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

 xenon@ radon / 525
 $

[1] http://de.wikipedia.org/wiki/Self-Monitoring,_Analysis_and_Reporting_Technology
 
smartmontools. Na Donnerwetter!

Aber eigentlich bin ich zum Mac gekommen, weil ich vorher kein IT-Studium zur Computerbenutzung abschliessen wollte...
(Stichwort User-GUI) :mad:
 
smartmontools. Na Donnerwetter!

Aber eigentlich bin ich zum Mac gekommen, weil ich vorher kein IT-Studium zur Computerbenutzung abschliessen wollte...
(Stichwort User-GUI) :mad:

tscha. Lernste mal die so viel beschworenen, zu Marketingzwecken, Unix Wurzeln kennen ;)

Gibts bestimmt auch irgendne shareware von jemanden, der n paar euro dafür haben will.
Bin ich aber nicht so der fan von. Googlen nach smart und mac sollte dem Threadersteller bestimmt helfen ;)
 
smart funktioniert bloss leider nur nicht bei externen USB platten ;)

interessant wäre es auch mal die grown defects der platte abzufragen...
 
Na, liegt am Chipset:

http://smartmontools.sourceforge.net/faq.html#testinghelp
The current USB mass storage specification is based on a version of SCSI (SPC-2) that can't support SAT. But some chips manufacturers implement proprietary SCSI commands that allow ATA pass through (similiar like for SAT). Well known is the cypress chipset, that contains an ATACB proprietary pass through (for ATA commands passed through SCSI commands) for which some information is publicly available PDF. Smartmontools SVN version support these cypress chips via the '-d usbcypress' option on the smartctl command line.

Und ne Liste mit den Disks, dies angeblich können sollen:

http://www.hdsentinel.com/usbharddisks.php


Aber du hast schon recht. das ist rar, und sollte mal implementiert werden, ..
 
Das Programm "Mac HelpMate" kann die Smart Werte auch auslesen. Ist umsonst!
 
Zurück
Oben Unten